SN74CBTLVR16292GR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 56 |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74CBTLVR |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| Type | Multiplexer/Demultiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Other Logic ICs |
| Technology | CMOS |
| Voltage - Supply | 2.3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 12 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74CBTLVR16292 |
| Pin Count | 56 |
| Number of Outputs | 2 |
| Circuit | 12 x 1:2 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 2.5/3.3V |
| Supply Voltage-Min (Vsup) | 2.3V |
| Throw Configuration | SPDT |
| Propagation Delay | 250 ps |
| Family | CBTLV/3B |
| Logic Function | Demultiplexer, Multiplexer |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74CBTLVR16292GR Overview
This is a relatively small item of digital switch that is included in the 56-TFSOP (0.240, 6.10mm Width) in order to save space on the board.Cut Tape (CT) is the method used for packaging.digital switch ic uses the method of Surface Mount for mounting.In the multiplexers, the analog IC is indicated by Multiplexer/Demultiplexer.By maintaining the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.When operated with a 2.3V~3.6V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.As a member of 74CBTLVR series, the multiplexers can be used for a wide range of applications.It is designed with 56 terminations as part of its basic configuration.To find signal switch's related components, a base part number of 74CBTLVR16292 may also be used.The multiplexer's system is powered by 2.5V voltage.Signal switch has 56 component pins.As a result, conductors end at GULL WING.In this case, the supply type is Single.A total of 56 pins are configured on this board.It is positioned in the direction of Surface Mount.In the CBTLV/3B family, the logic switch is included.It is recommended that the minimum supply voltage (Vsup) be kept at 2.3V so that unnecessary failures can be prevented.Keeping Vsup at 3.6V will prevent some unnecessary failures.Normally, 2.5/3.3V is powered by a battery.In order for the turn signal switch to work, there are 2 outputs.This is a signal switch that is categorized as Other Logic ICs.
SN74CBTLVR16292GR Features
Supplied in the 56-TFSOP (0.240, 6.10mm Width) package
Adopting a supply type of Single
Power supplies of 2.5/3.3V
SN74CBTLVR16292GR Applications
There are a lot of Texas Instruments SN74CBTLVR16292GR Signal Switches / Multiplexers / Decoders applications.
- Medical industry
- Time division multiplexing system
- VGA
- Code conversion
- Idle motor
- Video transmission
- Electronically controlled engine system
- HD surveillance system
- To select different devices in microprocessor input
- Control unit of Central Processing unit (CPU)
