SN74CBTLVR16292LR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 56 |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74CBTLVR |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| Type | Multiplexer/Demultiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Other Logic ICs |
| Technology | CMOS |
| Voltage - Supply | 2.3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 12 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.635mm |
| Base Part Number | 74CBTLVR16292 |
| Pin Count | 56 |
| Number of Outputs | 2 |
| Circuit | 12 x 1:2 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 2.5/3.3V |
| Supply Voltage-Min (Vsup) | 2.3V |
| Throw Configuration | SPDT |
| Propagation Delay | 250 ps |
| Family | CBTLV/3B |
| Logic Function | Demultiplexer, Multiplexer |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height Seated (Max) | 2.79mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74CBTLVR16292LR Overview
In order to save board space, digital switch is located in the 56-BSSOP (0.295, 7.50mm Width).It is packaged according to the Cut Tape (CT) method.In terms of mounting, digital switch ic uses the method of Surface Mount.A digital IC Multiplexer/Demultiplexer is used as the analog component of the multiplexers.When the operating temperature is kept at -40°C~85°C, the machine will not be sensturn signal switchive to external influences.Designers have greater flexibility using digital controlled switch when it works with 2.3V~3.6V voltage.In addition to being a member of the 74CBTLVR series, these multiplexers have a wide range of applications.There are 56 terminations included in its basic configuration.The base part number is 74CBTLVR16292, which is also useful when looking up signal switch's related components.The multiplexer is supplied with 2.5V voltage.In this turn signal switch, there are 56 components that can be connected to each pin.A conductor terminates at GULL WING.Single is used as its supply type.The board is configured with 56 pins.The mounting point is Surface Mount.The logic switch object belongs to the family of CBTLV/3B.Keep Vsup at 2.3V to avoid unnecessary failures.It is advisable that the maximal supply voltage (Vsup) remains at 3.6V to avoid some unnecessary failures.The power supply of 2.5/3.3V is provided for mux switch's normal operation.For the turn signal switch's operation, there are 2 outputs.The digital switch ic is an electronic part classified into Other Logic ICs.
SN74CBTLVR16292LR Features
Supplied in the 56-BSSOP (0.295, 7.50mm Width) package
Adopting a supply type of Single
Power supplies of 2.5/3.3V
SN74CBTLVR16292LR Applications
There are a lot of Texas Instruments SN74CBTLVR16292LR Signal Switches / Multiplexers / Decoders applications.
- Time division multiplexing system
- Electronics industry
- Electronically controlled engine system
- Frequency multiplexing system
- To select different task for memory in microprocessor memory systems
- Decimal decoder
- Recording transmission
- Signal router
- Home automation system
- Data communication
