SN74CBTLVR16292VR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-TFSOP (0.173, 4.40mm Width) |
| Number of Pins | 56 |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74CBTLVR |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| Type | Multiplexer/Demultiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Other Logic ICs |
| Technology | CMOS |
| Voltage - Supply | 2.3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 12 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.4mm |
| Base Part Number | 74CBTLVR16292 |
| Pin Count | 56 |
| Number of Outputs | 2 |
| Circuit | 12 x 1:2 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 2.5/3.3V |
| Supply Voltage-Min (Vsup) | 2.3V |
| Throw Configuration | SPDT |
| Propagation Delay | 250 ps |
| Family | CBTLV/3B |
| Logic Function | Demultiplexer, Multiplexer |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74CBTLVR16292VR Overview
It is included in the 56-TFSOP (0.173, 4.40mm Width) in order to save board space.As a result, it is packaged in a way that is referred to as Cut Tape (CT).Mounting is performed using Surface Mount.For the analog part of the multiplexers, an IC Multiplexer/Demultiplexer is used.By maintaining the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.Design engineers have more flexibility when digital controlled switch operates at 2.3V~3.6V voltage.Since they are members of the 74CBTLVR series, they can be used in a wide variety of applications.As part of its basic configuration, 56 terminations are designed as a part of it.To find signal switch's related components, a base part number of 74CBTLVR16292 may also be used.The multiplexer's system is powered by 2.5V voltage.Currently, this turn signal switch has a total of 56 component pins.GULL WING represents the end of conductors.In this case, Single is employed as the supply type.A configuration of 56 pins is used.Multiplexer ics are mounted in the direction of Surface Mount.The logic switch is a member of the CBTLV/3B family.Avoid unnecessary failures by keeping the supply voltage (Vsup) at 2.3V.In order to avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 3.6V.For mux switch's normal operation, there is a power supply provided at 2.5/3.3V.The turn signal switch has 2 outputs designed for operation.I would classify the digital switch ic as an electronic part belonging to the Other Logic ICs category.
SN74CBTLVR16292VR Features
Supplied in the 56-TFSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 2.5/3.3V
SN74CBTLVR16292VR Applications
There are a lot of Texas Instruments SN74CBTLVR16292VR Signal Switches / Multiplexers / Decoders applications.
- A robotic vehicle with the metal detector
- Electronic circuits
- Relay
- Data collection system
- Electronically controlled engine system
- Robotic vehicles
- PCIe
- Make half adder
- VGA
- Enabling different rows of memory depending on address in memory chips
