SN74CBTR16861DGGR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 48 |
| Weight | 223.195796mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74CBTR |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 50Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74CBTR16861 |
| Pin Count | 48 |
| Operating Supply Voltage | 5V |
| Circuit | 10 x 1:1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Ports | 2 |
| Nominal Supply Current | 3μA |
| Output Current | 64mA |
| Number of Bits | 20 |
| Throw Configuration | SPST |
| Propagation Delay | 1.25 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| High Level Output Current | 64mA |
| Low Level Output Current | 15mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 2 |
| Width | 6.1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74CBTR16861DGGR Overview
In order to conserve board space, digital switch is included in the 48-TFSOP (0.240, 6.10mm Width).The package is packaged in accordance with Cut Tape (CT).The mounting method digital switch ic uses is Surface Mount.The analog IC in the multiplexers is identified as Bus Switch.A temperature of -40°C~85°C will not leave the turn signal swturn signal switchch susceptible to external influences.Designers have greater flexibility using digital controlled switch when it works with 4.5V~5.5V voltage.These multiplexers are members of the 74CBTR series, which provide extensive application potential.The basic configuration includes 48 terminations.There is a base part number 74CBTR16861 that can be used to locate signal switch's related components as well.The multiplexer's system is powered by 5V voltage.This turn signal switch contains 48 component pins.It employs GULL WING as the point at which conductors come to an end.There is a type of supply of Single.It is configured with 48 pins.The mounting is in the way of Surface Mount.I would like to refer to the logic switch as a member of the CBT/FST/QS/5C/B family.As a result, signal multiplexer provides 20 bits.In order to prevent unnecessary failures, it is recommended that the minimal supply voltage (Vsup) be kept at 4V.In order to maintain mux switch's normal operation, power is provided to 5V.I would classify the digital switch ic as an electronic part belonging to the Bus Driver/Transceivers category.If the supply voltage is set to 5V, reliable performance of the multiplexers can be achieved.With a resistance of 0, it operates.It operates with a resistance of 50Ohm.In order to provide greater switches' flexibility, 64mA is provided as the output current.
SN74CBTR16861DGGR Features
Supplied in the 48-TFSOP (0.240, 6.10mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBTR16861DGGR Applications
There are a lot of Texas Instruments SN74CBTR16861DGGR Signal Switches / Multiplexers / Decoders applications.
- GLAN
- Automatic Monitoring systems
- Data-routing applications
- Logic gates for other digital devices
- Control unit of Central Processing unit (CPU)
- RF-based home automation system
- HD surveillance system
- PCIe
- Computer memory
- Enabling different rows of memory depending on address in memory chips
