SN74CBTR16861DL
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 48 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74CBTR |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| Type | Bus Switch |
| Resistance | 50Ohm |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74CBTR16861 |
| Pin Count | 48 |
| Qualification Status | Not Qualified |
| Circuit | 10 x 1:1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Ports | 2 |
| Output Current | 64mA |
| Number of Bits | 10 |
| Propagation Delay | 1.25 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | 64mA |
| Low Level Output Current | 15mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 2 |
| Length | 15.875mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
SN74CBTR16861DL Overview
It is included in the 48-BSSOP (0.295, 7.50mm Width) in order to save board space.As a result, it is packaged in a way that is referred to as Tube.digital switch ic uses the method of Surface Mount for mounting.The analog IC used in the multiplexers can be referred to as Bus Switch.The operating temperature of -40°C~85°C will not be susceptible to external factors.When operated with a 4.5V~5.5V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.Multiplexers of the 74CBTR series can be used in a wide range of applications.As parts of its basic configuration, 48 terminations are desgined.The base part number is 74CBTR16861, which is also useful when looking up signal switch's related components.In multiplexer's system, 5V is the voltage supplied.This turn signal switch contains 48 component pins.As the end of conductors, it uses GULL WING.Its supply type is Single, which is used as the source of power.Currently, it is configured with 48 pins.It is positioned in the direction of Surface Mount.In the CBT/FST/QS/5C/B family, the logic switch is included.There are 10 bits in signal multiplexer.Keep Vsup at 4V to avoid unnecessary failures.It is advisable to keep the maximum supply voltage (Vsup) at 5.5V so as to avoid some unnecessary failures.Normally, 5V is powered by a battery.In electronic terms, the digital switch ic is classified as part number Bus Driver/Transceivers.As far as the resistance is concerned, it operates with 2.A resistance of 50Ohm is used to operate the signal switching.There is an output current of 64mA that allows for greater switches' flexibility.
SN74CBTR16861DL Features
Supplied in the 48-BSSOP (0.295, 7.50mm Width) package
Adopting a supply type of Single
Power supplies of 5V
SN74CBTR16861DL Applications
There are a lot of Texas Instruments SN74CBTR16861DL Signal Switches / Multiplexers / Decoders applications.
- Enabling different functions units in microprocessor instruction decoding
- Robotic vehicles
- Time division multiplexing system
- To select different devices in microprocessor input
- VGA
- Make half adder
- Used to connect a single source to multiple destinations
- To select different devices in microprocessor output
- High-performance memory systems
- Data demultiplexing
