SN74CBTR16861DLG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 48 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74CBTR |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| Type | Bus Switch |
| Resistance | 50Ohm |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74CBTR16861 |
| Pin Count | 48 |
| Qualification Status | Not Qualified |
| Circuit | 10 x 1:1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Ports | 2 |
| Output Current | 64mA |
| Number of Bits | 10 |
| Propagation Delay | 1.25 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | 64mA |
| Low Level Output Current | 15mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 2 |
| Length | 15.875mm |
| Width | 7.49mm |
| RoHS Status | ROHS3 Compliant |
SN74CBTR16861DLG4 Overview
Digital switch is provided in the 48-BSSOP (0.295, 7.50mm Width) for the purpose of saving board space.The package is packaged in accordance with Tube.Surface Mount is the mounting method digital switch ic uses.Bus Switch is the analog IC that the multiplexers uses.In the case of -40°C~85°C, turn signal switch will not be affected by external factors.The turn signal switch is designed for use with a 4.5V~5.5V supply voltage, which gives it a lot of flexibility.As a member of 74CBTR series, the multiplexers can be used for a wide range of applications.The basic configuration includes 48 terminations.The base part number is 74CBTR16861, so you can find its logic switch related parts using that number.In this case, 5V is the voltage supplied to the multiplexer's system.A component pin count of 48 is found on this turn signal switch.As a result, GULL WING represents the end of the conductors.This supply type employs Single.With 48 pins, it is configured.The multiplexer ic is mounted in the direction of Surface Mount.The logic switch is a member of the CBT/FST/QS/5C/B family.In the signal multiplexer, there are 10 bits available.To prevent unnecessary failures, it is recommended that the minimum supply voltage (Vsup) remain at 4V.Keeping Vsup at 5.5V will prevent some unnecessary failures.The power supply of 5V is provided for mux switch's normal operation.This is an the digital switch ic that is classified as Bus Driver/Transceivers.The resistance is 2.The resistance of the signal switching is 50Ohm.For higher switches' flexibility, 64mA is provided as an output current.
SN74CBTR16861DLG4 Features
Supplied in the 48-BSSOP (0.295, 7.50mm Width) package
Adopting a supply type of Single
Power supplies of 5V
SN74CBTR16861DLG4 Applications
There are a lot of Texas Instruments SN74CBTR16861DLG4 Signal Switches / Multiplexers / Decoders applications.
- Make half adder
- LVDS
- A/D converters
- Paper plants
- Logic gates for other digital devices
- Analog, digital or video signal switching
- Steel plants
- HD surveillance system
- Microprocessor instruction decoding
- Enabling different rows of memory depending on address in memory chips
