SN74CBTS16211DGGR

56 Terminations4.5V~5.5V 56 Pin 74CBTS16211 Signal switch74CBTS Series 2 Functions

Manufacturer: Texas Instruments
Nocochips NO: 815-SN74CBTS16211DGGR
Package: 56-TFSOP (0.240, 6.10mm Width)
Datasheet: -
Stock: 508
Description: 56 Terminations4.5V~5.5V 56 Pin 74CBTS16211 Signal switch74CBTS Series 2 Functions(Kg)

Details

Tags

Parameters
Power Supplies	5V
Supply Voltage-Min (Vsup)	4V
Load Capacitance	50pF
Number of Ports	2
Nominal Supply Current	3μA
Output Current	64mA
Number of Bits	24
Throw Configuration	SPST
Propagation Delay	250 ps
Quiescent Current	3μA
Turn On Delay Time	9.3 ns
Family	CBT/FST/QS/5C/B
Output Characteristics	3-STATE
Supply Type	Single
Bandwidth	200MHz
High Level Output Current	-128mA
Low Level Output Current	128mA
Power Supply Current-Max (ICC)	0.003mA
Voltage Supply Source	Single Supply
Independent Circuits	2
Count Direction	BIDIRECTIONAL
Translation	N/A
Height	1.2mm
Length	14mm
Width	6.1mm
Thickness	1.15mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 5 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	56-TFSOP (0.240, 6.10mm Width)
Number of Pins	56
Weight	252.792698mg
Operating Temperature	-40°C~85°C
Packaging	Cut Tape (CT)
Series	74CBTS
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	56
ECCN Code	EAR99
Type	Bus Switch
Resistance	7Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Bus Driver/Transceivers
Packing Method	TR
Technology	CMOS
Voltage - Supply	4.5V~5.5V
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	5V
Terminal Pitch	0.5mm
Base Part Number	74CBTS16211
Pin Count	56
Operating Supply Voltage	5V
Circuit	12 x 1:1
Polarity	Non-Inverting

SN74CBTS16211DGGR Overview

This is a relatively small item of digital switch that is included in the 56-TFSOP (0.240, 6.10mm Width) in order to save space on the board.It is packaged according to the Cut Tape (CT) method.In terms of mounting, digital switch ic uses the method of Surface Mount.The analog IC used in the multiplexers can be referred to as Bus Switch.If the operating temperature is maintained at -40°C~85°C, turn signal switch will not be susceptible to external factors.With a supply voltage of 4.5V~5.5V, designers have greater flexibility of digital controlled switch.The multiplexers can be used for a wide range of applications since they are members of 74CBTS series.Among its basic configurations are 56 terminations.As its base part number is 74CBTS16211, logic switch can also be used to find its related parts.In multiplexer's system, 5V is the voltage supplied.This turn signal switch consists of 56 component pins.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.The supply type of this multiplexer ic is Single.The board has 56 pins configured.The mount is in Surface Mount.The logic switch is included into the family of CBT/FST/QS/5C/B.In this signal multiplexer, there are 24 bits that are provided.Keeping Vsup at 4V will prevent some unwanted failures.For mux switch's normal operation, power supply 5V is provided.The digital switch ic is an electronic part classified into Bus Driver/Transceivers.Despite not interacting with external factors, it consumes 3μA current of multiplexer ic.The performance of the multiplexers of a system can be reliably achieved with a supply voltage of 5V.Currently, the switches is packaged in accordance with the TR method.A resistance of 2 is used to operate the signal switching.In terms of resistance, it has a value of 7Ohm.There is an output current of 64mA that allows for greater switches' flexibility.