Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
56-BSSOP (0.295, 7.50mm Width) |
Number of Pins |
56 |
Weight |
694.790113mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
Series |
74CBTS |
JESD-609 Code |
e4 |
Pbfree Code |
no |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
56 |
Termination |
SMD/SMT |
ECCN Code |
EAR99 |
Type |
Bus Switch |
Resistance |
7Ohm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Bus Driver/Transceivers |
Technology |
CMOS |
Voltage - Supply |
4.5V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Terminal Pitch |
0.635mm |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
74CBTS16211 |
Pin Count |
56 |
Qualification Status |
Not Qualified |
Max Output Current |
64mA |
Operating Supply Voltage |
5V |
Circuit |
12 x 1:1 |
Polarity |
Non-Inverting |
Power Supplies |
5V |
Supply Voltage-Min (Vsup) |
4V |
Number of Ports |
2 |
Nominal Supply Current |
3μA |
Output Current |
64mA |
Number of Bits |
24 |
Throw Configuration |
SPST |
Propagation Delay |
250 ps |
Quiescent Current |
3μA |
Turn On Delay Time |
9.3 ns |
Family |
CBT/FST/QS/5C/B |
Output Characteristics |
3-STATE |
Supply Type |
Single |
Bandwidth |
200MHz |
High Level Output Current |
-128mA |
Low Level Output Current |
128mA |
Voltage Supply Source |
Single Supply |
Independent Circuits |
2 |
Length |
18.415mm |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
SN74CBTS16211DL Overview
In order to save board space, digital switch is located in the 56-BSSOP (0.295, 7.50mm Width).It is packaged according to the Tube method.digital switch ic uses the method of Surface Mount for mounting.The analog IC in the multiplexers is identified as Bus Switch.In the case of -40°C~85°C, turn signal switch will not be affected by external factors.It provides digital controlled switch's superior flexibility for designers to use when it operates with a supply voltage of 4.5V~5.5V.provides digital controlled switch's digital controlled switch'sMultiplexers in the 74CBTS series are suitable for a wide range of applications.As parts of its basic configuration, 56 terminations are desgined.Its logic switch base part number is 74CBTS16211 which can also be used to find its logic switch related parts.The multiplexer's system is powered by 5V voltage.This turn signal switch has a total of 56 component pins.As a result, conductors end at GULL WING.Single is employed as its supply type.A total of 56 pins are configured on this board.The multiplexer ic is mounted in the direction of Surface Mount.The logic switch is a member of the family of CBT/FST/QS/5C/B.The multiplexer ic provides 24 bits.The minimal supply voltage (Vsup) should be kept at 4V to avoid some unnecessary failures.mux switch's normal operation requires the power supply of 5V.In electronic terms, the digital switch ic is classified as part number Bus Driver/Transceivers.In the absence of external influences, it consumes 3μA current of multiplexer ic.The performance of the multiplexers of a system can be reliably achieved with a supply voltage of 5V.A resistance of 2 governs its operation.With a resistance of 7Ohm, it operates.For increased switches' flexibility, the output current of 64mA is provided.
SN74CBTS16211DL Features
Supplied in the 56-BSSOP (0.295, 7.50mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBTS16211DL Applications
There are a lot of Texas Instruments SN74CBTS16211DL Signal Switches / Multiplexers / Decoders applications.
- Analog, digital or video signal switching
- HDMI applications
- Microprocessor instruction decoding
- Audio transmission
- LVDS
- Control unit of Central Processing unit (CPU)
- Automation system
- Memory system of computers
- Make full adder
- War field flying robot with a night vision flying camera