Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
56-BSSOP (0.295, 7.50mm Width) |
Number of Pins |
56 |
Weight |
694.790113mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Series |
74CBTS |
Pbfree Code |
no |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
56 |
Type |
Bus Switch |
Resistance |
7Ohm |
Subcategory |
Bus Driver/Transceivers |
Technology |
CMOS |
Voltage - Supply |
4.5V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
NOT SPECIFIED |
Number of Functions |
2 |
Supply Voltage |
5V |
Terminal Pitch |
0.635mm |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
74CBTS16211 |
Pin Count |
56 |
Qualification Status |
Not Qualified |
Operating Supply Voltage |
5V |
Circuit |
12 x 1:1 |
Power Supplies |
5V |
Supply Voltage-Min (Vsup) |
4V |
Number of Ports |
2 |
Nominal Supply Current |
3μA |
Output Current |
64mA |
Number of Bits |
24 |
Propagation Delay |
250 ps |
Quiescent Current |
3μA |
Turn On Delay Time |
9.3 ns |
Family |
CBT/FST/QS/5C/B |
Output Characteristics |
3-STATE |
Supply Type |
Single |
Bandwidth |
200MHz |
Output Polarity |
TRUE |
High Level Output Current |
-128mA |
Low Level Output Current |
128mA |
Voltage Supply Source |
Single Supply |
Independent Circuits |
2 |
Length |
18.415mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
SN74CBTS16211DLR Overview
In order to conserve board space, digital switch is included in the 56-BSSOP (0.295, 7.50mm Width).The package is packaged in the manner of Tape & Reel (TR).Surface Mount is the mounting method digital switch ic uses.The analog IC in the multiplexers is identified as Bus Switch.If the operating temperature is maintained at -40°C~85°C, turn signal switch will not be susceptible to external factors.When operated with a 4.5V~5.5V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.The multiplexers can be used for a wide range of applications since they are members of 74CBTS series.There is a design for terminating 56 as part of its basic configuration.Its logic switch base part number is 74CBTS16211 which can also be used to find its logic switch related parts.The multiplexer is supplied with 5V voltage.In this turn signal switch, there are 56 components that can be connected to each pin.It is the end of conductors that is represented by GULL WING.In this case, the supply type is Single.The board is configured with 56 pins.The multiplexer ic is mounted in the direction of Surface Mount.Among the family of CBT/FST/QS/5C/B the logic switch is a member.There are 24 bits in signal multiplexer.Keep Vsup at 4V to avoid unnecessary failures.There is a power supply provided for the mux switch's normal operation of 5V.Bus Driver/Transceivers is the classification for this the digital switch ic.Without external influences, it consumes 3μA current of multiplexer ic.Supply voltages of 5V can provide reliable performance of the multiplexers.The resistance is 2.This signal switching operates at a resistance of 7Ohm.64mA provides a high degree of switches' flexibility.
SN74CBTS16211DLR Features
Supplied in the 56-BSSOP (0.295, 7.50mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBTS16211DLR Applications
There are a lot of Texas Instruments SN74CBTS16211DLR Signal Switches / Multiplexers / Decoders applications.
- Enabling block of memory depending on address in memory chips
- Control unit of Central Processing unit (CPU)
- Memory system of computers
- Logic gates for other digital devices
- Speed control of medern motors
- Implementing boolean functions with multiple variables
- High-performance memory-decoding applications
- Make full adder
- Communication system
- Enabling different rows of memory depending on address in memory chips