SN74CBTS16212DGGR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 56 |
| Weight | 252.792698mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74CBTS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Type | Bus FET Exchange Switch |
| Resistance | 6Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | TTL COMPATIBLE BUS SWITCH |
| Subcategory | Other Logic ICs |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74CBTS16212 |
| Pin Count | 56 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Circuit | 12 x 2:2 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Load Capacitance | 50pF |
| Number of Ports | 4 |
| Nominal Supply Current | 250mA |
| Output Current | 64mA |
| Number of Bits | 24 |
| Throw Configuration | DPDT |
| Propagation Delay | 250 ps |
| Quiescent Current | 3μA |
| Turn On Delay Time | 10.4 ns |
| Family | CBT/FST/QS/5C/B |
| Number of Inputs | 24 |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 200MHz |
| Prop. Delay@Nom-Sup | 0.25 ns |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Power Supply Current-Max (ICC) | 0.003mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Count Direction | BIDIRECTIONAL |
| Translation | N/A |
| Height | 1.2mm |
| Length | 14mm |
| Width | 6.1mm |
| Thickness | 1.15mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74CBTS16212DGGR Overview
The reason it is provided is that the board space can be saved by placing digital switch in the 56-TFSOP (0.240, 6.10mm Width).It is packaged in the way of Cut Tape (CT).The mounting method digital switch ic uses is Surface Mount.The analog IC in the multiplexers is identified as Bus FET Exchange Switch.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.It provides digital controlled switch's superior flexibility for designers to use when it operates with a supply voltage of 4.5V~5.5V.provides digital controlled switch's digital controlled switch'sAs a member of 74CBTS series, the multiplexers can be used for a wide range of applications.Among its basic features are 56 terminations.Its logic switch base part number is 74CBTS16212 which can also be used to find its logic switch related parts.For multiplexer's system, 5V voltage is supplied.In this turn signal switch, there are 56 components that can be connected to each pin.As the end of conductors, it uses GULL WING.There is a type of supply Single that is employed in this case.This multiplexer ic has 56 pins configured.Surface Mount is the way it is mounted.The CBT/FST/QS/5C/B family includes the logic switch.In the signal multiplexer, there are 24 bits available.Vsup should be kept at 4V to prevent some unnecessary failures.Normally, 5V is powered by a battery.Part number Other Logic ICs indicates that the digital switch ic is an electronic part.Without external influences, it consumes 3μA current of multiplexer ic.Reliable performance of the multiplexers can be achieved when a supply voltage of 5V is provided.The multiplexer is equipped with 24 inputs.The switches package is packaged in accordance with the TR method.With a resistance of 0, it operates.The system operates with a resistance of 6Ohm.Additionally, TTL COMPATIBLE BUS SWITCH provides improved characteristics.The output current of 64mA is provided for higher switches' flexibility.
SN74CBTS16212DGGR Features
Supplied in the 56-TFSOP (0.240, 6.10mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
TTL COMPATIBLE BUS SWITCH
SN74CBTS16212DGGR Applications
There are a lot of Texas Instruments SN74CBTS16212DGGR Signal Switches / Multiplexers / Decoders applications.
- Arithmetic Logic Units
- HD surveillance system
- Implementing boolean functions with multiple variables
- GLAN
- Telephone network
- Data-routing applications
- Audio transmission
- Video transmission
- Enabling block of memory depending on address in memory chips
- Memory system of computers
