SN74CBTS16212DL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 56 |
| Weight | 694.790113mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74CBTS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Bus FET Exchange Switch |
| Resistance | 6Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | TTL COMPATIBLE BUS SWITCH |
| Subcategory | Other Logic ICs |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74CBTS16212 |
| Pin Count | 56 |
| Qualification Status | Not Qualified |
| Max Output Current | 64mA |
| Operating Supply Voltage | 5V |
| Circuit | 12 x 2:2 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Load Capacitance | 50pF |
| Number of Ports | 4 |
| Nominal Supply Current | 250mA |
| Output Current | 64mA |
| Number of Bits | 24 |
| Throw Configuration | DPDT |
| Propagation Delay | 250 ps |
| Quiescent Current | 3μA |
| Turn On Delay Time | 10 ns |
| Family | CBT/FST/QS/5C/B |
| Number of Inputs | 24 |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 200MHz |
| Address Bus Width | 24b |
| Prop. Delay@Nom-Sup | 0.25 ns |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Power Supply Current-Max (ICC) | 0.003mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Count Direction | BIDIRECTIONAL |
| Translation | N/A |
| Height | 2.79mm |
| Length | 18.41mm |
| Width | 7.49mm |
| Thickness | 2.59mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74CBTS16212DL Overview
For the purpose of saving board space, digital switch is included in the 56-BSSOP (0.295, 7.50mm Width).In this case, it is packaged as Tube.Mounting is performed using Surface Mount.The analog IC used in the multiplexers can be referred to as Bus FET Exchange Switch.When the operating temperature is kept at -40°C~85°C, the machine will not be sensturn signal switchive to external influences.With a supply voltage of 4.5V~5.5V, designers have greater flexibility of digital controlled switch.The multiplexers can be used for a wide range of applications since they are members of 74CBTS series.Among its basic configurations are 56 terminations.In addition, it also has a base part number of 74CBTS16212, which can be used to find related parts.In multiplexer's system, 5V is the voltage supplied.This turn signal switch contains 56 component pins.It is the end of conductors that is represented by GULL WING.There is a type of supply Single that is employed in this case.This multiplexer ic is configured with 56 pins.It is positioned in the direction of Surface Mount.There is a family of CBT/FST/QS/5C/B members.Signal multiplexer contains 24 bits.It is recommended that the minimum supply voltage (Vsup) be kept at 4V to avoid some unnecessary failures.A power supply is provided for mux switch's normal operation of 5V.This is an the digital switch ic that is classified as Other Logic ICs.There are no external influences on this multiplexer ic, so it consumes 3μA current.The performance of the multiplexers of a system can be reliably achieved with a supply voltage of 5V.In this multiplexer, there is a total of 24 inputs.The system operates with a resistance of 4.As far as the resistance is concerned, it operates with 6Ohm.Furthermore, the characteristics of TTL COMPATIBLE BUS SWITCH have been improved.For greater switches' flexibility, the output current of 64mA is provided.
SN74CBTS16212DL Features
Supplied in the 56-BSSOP (0.295, 7.50mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
TTL COMPATIBLE BUS SWITCH
SN74CBTS16212DL Applications
There are a lot of Texas Instruments SN74CBTS16212DL Signal Switches / Multiplexers / Decoders applications.
- A robotic vehicle with the metal detector
- Code converters
- LVDS
- Data distribution
- Microprocessor instruction decoding
- Data demultiplexing
- Robotic vehicles
- Data collection system
- Combinational circuit
- HD surveillance system
