SN74CBTS3306D
| Parameters | |
|---|---|
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74CBTS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| Type | Bus Switch |
| Resistance | 14Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 74CBTS3306 |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Circuit | 1 x 1:1 |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Channels | 2 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 64mA |
| Number of Bits | 2 |
| Propagation Delay | 5.6 ns |
| Quiescent Current | 3μA |
| Turn On Delay Time | 5.6 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Power Supply Current-Max (ICC) | 0.003mA |
| Voltage Supply Source | Single Supply |
| Count Direction | BIDIRECTIONAL |
| Translation | N/A |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
SN74CBTS3306D Overview
For the purpose of saving board space, digital switch is included in the 8-SOIC (0.154, 3.90mm Width).As a result, it is packaged in the way of Tube.digital switch ic uses the method of Surface Mount for mounting.The analog IC used in the multiplexers can be referred to as Bus Switch.The operating temperature of -40°C~85°C will not be susceptible to external factors.A supply voltage of 4.5V~5.5V provides digital controlled switch's superior flexibility for designers.Since they are members of the 74CBTS series, they can be used in a wide variety of applications.The basic configuration includes 8 terminations.There is a base part number 74CBTS3306 that can be used to locate signal switch's related components as well.For multiplexer's system, a voltage of 5V is supplied.Signal switch has 8 component pins.A conductor terminates at GULL WING.In this case, the supply type is Single.Currently, it is configured with 8 pins.It is positioned in the direction of Surface Mount.In the CBT/FST/QS/5C/B family, the logic switch is included.Signal multiplexer provides 2 bits.Avoid unnecessary failures by keeping the supply voltage (Vsup) at 4V.For mux switch's normal operation, power supply 5V is provided.I would classify the digital switch ic as an electronic part belonging to the Bus Driver/Transceivers category.In the absence of external influences, it consumes 3μA current of multiplexer ic.It is possible to achieve reliable performance of the multiplexers with a voltage supply of 5V.A resistance of 2 governs its operation.The resistance of the signal switching is 14Ohm.Transmission is carried out over 2 channels in the turn signal switch's circuit.For greater switches' flexibility, the output current of 64mA is provided.
SN74CBTS3306D Features
Supplied in the 8-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBTS3306D Applications
There are a lot of Texas Instruments SN74CBTS3306D Signal Switches / Multiplexers / Decoders applications.
- Frequency multiplexing system
- PCIe
- Computer memory
- HDMI applications
- Memory chips
- Idle motor
- Data collection system
- Code converters
- Paper plants
- Electronic circuits
