SN74CBTS3306DR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74CBTS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 14Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 74CBTS3306 |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Circuit | 1 x 1:1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 250mA |
| Number of Bits | 2 |
| Throw Configuration | SPST |
| Propagation Delay | 350 ps |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Power Supply Current-Max (ICC) | 0.003mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 2 |
| Count Direction | BIDIRECTIONAL |
| Translation | N/A |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74CBTS3306DR Overview
This is a relatively small item of digital switch that is included in the 8-SOIC (0.154, 3.90mm Width) in order to save space on the board.Cut Tape (CT) represents its packaging.As far as mounting is concerned, digital switch ic uses Surface Mount.As the analog part, the circuit uses an analog IC Bus Switch.When the operating temperature is kept at -40°C~85°C, the machine will not be sensturn signal switchive to external influences.With a supply voltage of 4.5V~5.5V, designers have greater flexibility of digital controlled switch.Multiplexers in the 74CBTS series are suitable for a wide range of applications.The basic configuration of this system includes 8 terminations.There is a base part number 74CBTS3306 that can be used to locate signal switch's related components as well.The voltage supplied for multiplexer's system is 5V.multiplexer's systemThis turn signal switch consists of 8 component pins.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.Single is employed as its supply type.The board is configured with 8 pins.As you can see, it is mounted in the direction of Surface Mount.I would like to refer to the logic switch as a member of the CBT/FST/QS/5C/B family.There are 2 bits in signal multiplexer.Vsup should be kept at 4V to prevent some unnecessary failures.The power supply of 5V is provided for mux switch's normal operation.The digital switch ic is a part of an electronic system classified as Bus Driver/Transceivers.It is possible to achieve reliable performance of the multiplexers with a voltage supply of 5V.A TR packaging method is used in the switches.2 ports are used for some other peripheral signal switchings to plug in.In terms of resistance, it has a value of 14Ohm.
SN74CBTS3306DR Features
Supplied in the 8-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBTS3306DR Applications
There are a lot of Texas Instruments SN74CBTS3306DR Signal Switches / Multiplexers / Decoders applications.
- Electronic circuits
- A/D converters
- GLAN
- Relay
- Data collection system
- Computer memory
- High-performance memory systems
- Implementing boolean functions with multiple variables
- Electronics industry
- CNC machines
