SN74CBTS3384DBR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 24 |
| Weight | 172.39345mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74CBTS |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Type | Bus Switch |
| Resistance | 7Ohm |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74CBTS3384 |
| Pin Count | 24 |
| Operating Supply Voltage | 5V |
| Circuit | 5 x 1:1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Ports | 2 |
| Nominal Supply Current | 3μA |
| Output Current | 64mA |
| Number of Bits | 10 |
| Throw Configuration | SPST |
| Propagation Delay | 250 ps |
| Quiescent Current | 3μA |
| Turn On Delay Time | 6.2 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 200MHz |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 2 |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74CBTS3384DBR Overview
This is a relatively small item of digital switch that is included in the 24-SSOP (0.209, 5.30mm Width) in order to save space on the board.It is packaged according to the Cut Tape (CT) method.Mounting is performed using Surface Mount.The analog IC used in the multiplexers can be referred to as Bus Switch.If the operating temperature is maintained at -40°C~85°C, turn signal switch will not be susceptible to external factors.Designers have greater flexibility using digital controlled switch when it works with 4.5V~5.5V voltage.Multiplexers in the 74CBTS series are suitable for a wide range of applications.This configuration includes 24 terminations as part of its basic functionality.There is a base part number of 74CBTS3384 which can also be used in order to locate the logic switch that are related to this item.For multiplexer's system, 5V voltage is supplied.Signal switch has 24 component pins.It employs GULL WING as the point at which conductors come to an end.Single is used as its supply type.This multiplexer ic has 24 pins configured.This unit is mounted in the way of Surface Mount.The logic switch is a member of the CBT/FST/QS/5C/B family.Signal multiplexer provides 10 bits.The minimal supply voltage (Vsup) should be kept at 4V to avoid some unnecessary failures.In order to maintain mux switch's normal operation, power is provided to 5V.This is an the digital switch ic that is classified as Bus Driver/Transceivers.It consumes 3μA current of multiplexer ic since it is not affected by external factors.Providing a supply voltage of 5V can provide reliable performance of the multiplexers.A resistance of 2 governs its operation.It operates with a resistance of 7Ohm.For greater switches' flexibility, the output current of 64mA is provided.
SN74CBTS3384DBR Features
Supplied in the 24-SSOP (0.209, 5.30mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBTS3384DBR Applications
There are a lot of Texas Instruments SN74CBTS3384DBR Signal Switches / Multiplexers / Decoders applications.
- Night vision cameras
- Data transfer
- Home automation system
- Used to connect a single source to multiple destinations
- Analog to digital conversion
- Combinational circuit
- Logic circuits
- Data demultiplexing
- D/A converters
- Automatic Monitoring systems
