banner_page

SN74CBTS3384DGVR

24 Terminations4.5V~5.5V 24 Pin 74CBTS3384 Signal switch74CBTS Series 1 Functions


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74CBTS3384DGVR
  • Package: 24-TFSOP (0.173, 4.40mm Width)
  • Datasheet: -
  • Stock: 468
  • Description: 24 Terminations4.5V~5.5V 24 Pin 74CBTS3384 Signal switch74CBTS Series 1 Functions(Kg)

Details

Tags

Parameters
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 24-TFSOP (0.173, 4.40mm Width)
Number of Pins 24
Weight 60.894776mg
Operating Temperature -40°C~85°C
Packaging Tape & Reel (TR)
Series 74CBTS
JESD-609 Code e4
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 24
Type Bus Switch
Resistance 7Ohm
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Bus Driver/Transceivers
Technology CMOS
Voltage - Supply 4.5V~5.5V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 0.4mm
Base Part Number 74CBTS3384
Pin Count 24
Operating Supply Voltage 5V
Circuit 5 x 1:1
Power Supplies 5V
Supply Voltage-Min (Vsup) 4V
Number of Ports 2
Nominal Supply Current 3μA
Output Current 64mA
Number of Bits 10
Propagation Delay 250 ps
Quiescent Current 3μA
Turn On Delay Time 6.2 ns
Family CBT/FST/QS/5C/B
Output Characteristics 3-STATE
Supply Type Single
Bandwidth 200MHz
Output Polarity TRUE
High Level Output Current -128mA
Low Level Output Current 128mA
Voltage Supply Source Single Supply
Independent Circuits 2
Length 5mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

SN74CBTS3384DGVR Overview


In order to save board space, digital switch is located in the 24-TFSOP (0.173, 4.40mm Width).Tape & Reel (TR) is the packaging method.Digital switch ic adheres to a mounting method of Surface Mount.As the analog part, the circuit uses an analog IC Bus Switch.Turn signal switch will not be susceptible to the external factors when the operating temperature is kept at -40°C~85°C.It provides digital controlled switch's superior flexibility for designers to use when it operates with a supply voltage of 4.5V~5.5V.provides digital controlled switch's digital controlled switch'sMultiplexers in the 74CBTS series are suitable for a wide range of applications.There are 24 terminations included in its basic configuration.The base part number is 74CBTS3384, which is also useful when looking up signal switch's related components.In this case, 5V is the voltage supplied to the multiplexer's system.Signal switch has 24 component pins.It is the end of conductors that is represented by GULL WING.The supply type of this multiplexer ic is Single.With 24 pins, it is configured.It is positioned in the direction of Surface Mount.I would like to refer to the logic switch as a member of the CBT/FST/QS/5C/B family.There are 10 bits in signal multiplexer.Avoid unnecessary failures by keeping the supply voltage (Vsup) at 4V.For mux switch's normal operation, there is a power supply provided at 5V.Part number Bus Driver/Transceivers indicates that the digital switch ic is an electronic part.It consumes 3μA current of multiplexer ic without external influences.It is possible to achieve reliable performance of the multiplexers with a voltage supply of 5V.A resistance of 2 governs its operation.With a resistance of 7Ohm, it operates.It is possible to provide a current output of 64mA for greater switches' flexibility.

SN74CBTS3384DGVR Features


Supplied in the 24-TFSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V

SN74CBTS3384DGVR Applications


There are a lot of Texas Instruments SN74CBTS3384DGVR Signal Switches / Multiplexers / Decoders applications.

  • HDMI applications
  • Combinational circuit
  • Time division multiplexing system
  • LVDS
  • Medium scale TV wall
  • Video transmission
  • Analog to digital conversion
  • Data communication
  • Idle motor
  • CNC machines

Write a review

Note: HTML is not translated!
    Bad           Good