SN74CBTS3384DW

24 Terminations4.5V~5.5V 24 Pin 74CBTS3384 Signal switch74CBTS Series 1 Functions

Manufacturer: Texas Instruments
Nocochips NO: 815-SN74CBTS3384DW
Package: 24-SOIC (0.295, 7.50mm Width)
Datasheet: PDF
Stock: 313
Description: 24 Terminations4.5V~5.5V 24 Pin 74CBTS3384 Signal switch74CBTS Series 1 Functions(Kg)

Details

Tags

Parameters
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 3 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	24-SOIC (0.295, 7.50mm Width)
Number of Pins	24
Weight	624.398247mg
Operating Temperature	-40°C~85°C
Packaging	Tube
Series	74CBTS
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	24
Termination	SMD/SMT
ECCN Code	EAR99
Type	Bus Switch
Resistance	7Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Bus Driver/Transceivers
Technology	CMOS
Voltage - Supply	4.5V~5.5V
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Base Part Number	74CBTS3384
Pin Count	24
Operating Supply Voltage	5V
Circuit	5 x 1:1
Polarity	Non-Inverting
Power Supplies	5V
Supply Voltage-Min (Vsup)	4V
Load Capacitance	50pF
Number of Ports	2
Nominal Supply Current	3μA
Output Current	64mA
Number of Bits	10
Throw Configuration	SPST
Propagation Delay	6.2 ns
Quiescent Current	3μA
Turn On Delay Time	6.2 ns
Family	CBT/FST/QS/5C/B
Output Characteristics	3-STATE
Supply Type	Single
Bandwidth	200MHz
High Level Output Current	-128mA
Low Level Output Current	128mA
Power Supply Current-Max (ICC)	0.003mA
Voltage Supply Source	Single Supply
Independent Circuits	2
Count Direction	BIDIRECTIONAL
Translation	N/A
Height	2.65mm
Length	15.4mm
Width	7.5mm
Thickness	2.35mm

SN74CBTS3384DW Overview

Digital switch is provided in the 24-SOIC (0.295, 7.50mm Width) for the purpose of saving board space.It is packaged according to the Tube method.In terms of mounting, digital switch ic uses the Surface Mount method .The analog IC in the multiplexers is identified as Bus Switch.By keeping the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.A supply voltage of 4.5V~5.5V provides digital controlled switch's superior flexibility for designers.In addition to being a member of the 74CBTS series, these multiplexers have a wide range of applications.There are 24 terminations included in its basic configuration.As its base part number is 74CBTS3384, logic switch can also be used to find its related parts.The multiplexer's system works with 5V voltage.There are 24 component pins in this turn signal switch.At the end of a conductor, it uses GULL WING as the point where the conductor ends.Its supply type is Single, which is used as the source of power.Currently, it is configured with a 24 pin configuration.The multiplexer ic is mounted in the direction of Surface Mount.The logic switch belongs to the family of CBT/FST/QS/5C/B.There are 10 bits signal multiplexer provides.Vsup should be kept at 4V to prevent some unnecessary failures.For mux switch's normal operation, there is a power supply provided at 5V.Bus Driver/Transceivers is a category for the digital switch ics.In the absence of external influences, it consumes 3μA current of multiplexer ic.Supply voltages of 5V can provide reliable performance of the multiplexers.2 ports are used for some other peripheral signal switchings to plug in.7Ohm is the resistance at which it operates.There is an output current of 64mA that allows for greater switches' flexibility.