Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
24-SOIC (0.295, 7.50mm Width) |
Number of Pins |
24 |
Weight |
624.398247mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Series |
74CBTS |
Pbfree Code |
yes |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
24 |
Type |
Bus Switch |
Resistance |
7Ohm |
Subcategory |
Bus Driver/Transceivers |
Technology |
CMOS |
Voltage - Supply |
4.5V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Number of Functions |
1 |
Supply Voltage |
5V |
Base Part Number |
74CBTS3384 |
Pin Count |
24 |
Operating Supply Voltage |
5V |
Circuit |
5 x 1:1 |
Power Supplies |
5V |
Supply Voltage-Min (Vsup) |
4V |
Load Capacitance |
50pF |
Number of Ports |
2 |
Output Current |
64mA |
Number of Bits |
10 |
Propagation Delay |
250 ps |
Quiescent Current |
3μA |
Turn On Delay Time |
6.2 ns |
Family |
CBT/FST/QS/5C/B |
Output Characteristics |
3-STATE |
Supply Type |
Single |
Output Polarity |
TRUE |
High Level Output Current |
-128mA |
Low Level Output Current |
128mA |
Voltage Supply Source |
Single Supply |
Independent Circuits |
2 |
Length |
15.365mm |
Width |
7.5mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74CBTS3384DWR Overview
In order to save board space, digital switch is located in the 24-SOIC (0.295, 7.50mm Width).It is packaged according to the Tape & Reel (TR) method.digital switch ic uses the method of Surface Mount for mounting.the multiplexers uses IC Bus Switch as the analog IC.By keeping the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.When operated with a 4.5V~5.5V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.In addition to being a member of the 74CBTS series, these multiplexers have a wide range of applications.There are 24 terminations included in its basic configuration.The base part number is 74CBTS3384, so you can find its logic switch related parts using that number.The multiplexer's system is supplied with a voltage of 5V.In this turn signal switch, there are 24 components that can be connected to each pin.As the end of conductors, it uses GULL WING.Its supply type is Single, which is used as the source of power.There are 24 pins on it.Surface Mount is the way it is mounted.There is a family of CBT/FST/QS/5C/B members.There are 10 bits signal multiplexer provides.The minimal supply voltage (Vsup) should be kept at 4V to avoid some unnecessary failures.It is provided that 5V has a power supply in order to function normally.The digital switch ic is an electronic part classified into Bus Driver/Transceivers.It consumes 3μA current of multiplexer ic since it is not affected by external factors.If the supply voltage is set to 5V, reliable performance of the multiplexers can be achieved.As far as the resistance is concerned, it operates with 2.This signal switching operates at a resistance of 7Ohm.Higher switches' flexibility is provided by providing 64mA as the output current.
SN74CBTS3384DWR Features
Supplied in the 24-SOIC (0.295, 7.50mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBTS3384DWR Applications
There are a lot of Texas Instruments SN74CBTS3384DWR Signal Switches / Multiplexers / Decoders applications.
- CPU memory location identification
- Video transmission
- Speed synchronization of multiple motors in industries
- Make half adder
- Microprocessor input/output systems
- Analog to digital conversion
- HDMI applications
- Time division multiplexing system
- Microprocessor instruction decoding
- Recording transmission