Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 5 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
24-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
24 |
Weight |
89.499445mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Cut Tape (CT) |
Series |
74CBTS |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
24 |
ECCN Code |
EAR99 |
Type |
Bus Switch |
Resistance |
7Ohm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Bus Driver/Transceivers |
Packing Method |
TR |
Technology |
CMOS |
Voltage - Supply |
4.5V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
0.65mm |
Base Part Number |
74CBTS3384 |
Pin Count |
24 |
Operating Supply Voltage |
5V |
Circuit |
5 x 1:1 |
Polarity |
Non-Inverting |
Power Supplies |
5V |
Supply Voltage-Min (Vsup) |
4V |
Load Capacitance |
50pF |
Number of Ports |
2 |
Nominal Supply Current |
3μA |
Output Current |
64mA |
Number of Bits |
10 |
Throw Configuration |
SPST |
Propagation Delay |
250 ps |
Quiescent Current |
3μA |
Turn On Delay Time |
6.2 ns |
Family |
CBT/FST/QS/5C/B |
Output Characteristics |
3-STATE |
Supply Type |
Single |
Bandwidth |
200MHz |
High Level Output Current |
-128mA |
Low Level Output Current |
128mA |
Power Supply Current-Max (ICC) |
0.003mA |
Voltage Supply Source |
Single Supply |
Independent Circuits |
2 |
Count Direction |
BIDIRECTIONAL |
Translation |
N/A |
Height |
1.2mm |
Length |
7.8mm |
Width |
4.4mm |
Thickness |
1mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74CBTS3384PWR Overview
It is included in the 24-TSSOP (0.173, 4.40mm Width) in order to save board space.Cut Tape (CT) is the method used for packaging.Digital switch ic uses a Surface Mount mounting method.The multiplexers uses an analog IC Bus Switch as the analog part of the circuit.Turn signal switch will not be susceptible to the external factors when the operating temperature is kept at -40°C~85°C.It provides digital controlled switch's superior flexibility for designers to use when it operates with a supply voltage of 4.5V~5.5V.provides digital controlled switch's digital controlled switch'sThe multiplexers from 74CBTS series can be used for a wide range of applications.As parts of its basic configuration, 24 terminations are desgined.The base part number is 74CBTS3384, so you can find its logic switch related parts using that number.The multiplexer's system works with 5V voltage.This turn signal switch has a total of 24 component pins.As a result, GULL WING represents the end of the conductors.The supply type of this multiplexer ic is Single.It is configured with 24 pins.The mount is in Surface Mount.The logic switch is a member of the family of CBT/FST/QS/5C/B.There are 10 bits signal multiplexer provides.It is recommended that the minimum supply voltage (Vsup) be kept at 4V so that unnecessary failures can be prevented.During mux switch's normal operation, 5V is provided with a power supply.In electronic terms, the digital switch ic is classified as part number Bus Driver/Transceivers.Without any external influences, it consumes 3μA current of multiplexer ic at all times.It is possible to achieve reliable performance of the multiplexers with a voltage supply of 5V.The switches package is packaged in accordance with the TR method.2 is the resistance at which it operates.A resistance of 7Ohm is used to operate the signal switching.It is possible to provide a current output of 64mA for greater switches' flexibility.
SN74CBTS3384PWR Features
Supplied in the 24-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBTS3384PWR Applications
There are a lot of Texas Instruments SN74CBTS3384PWR Signal Switches / Multiplexers / Decoders applications.
- Data collection system
- Home automation system
- Enabling different rows of memory depending on address in memory chips
- Data demultiplexing
- Microprocessor instruction decoding
- Seven segment displays
- Transmission from the computer system of a satellite
- Used to connect a single source to multiple destinations
- A robotic vehicle with the metal detector
- Logic gates for other digital devices