SN74CBTS6800DBQR
| Parameters | |
|---|---|
| Number of Ports | 2 |
| Nominal Supply Current | 3μA |
| Output Current | 64mA |
| Number of Bits | 10 |
| Throw Configuration | SPST |
| Propagation Delay | 250 ps |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| High Level Output Current | 64mA |
| Low Level Output Current | 15mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Length | 8.65mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 24 |
| Weight | 129.500622mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74CBTS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 24 |
| Type | Bus Switch |
| Resistance | 7Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Base Part Number | 74CBTS6800 |
| Pin Count | 24 |
| Operating Supply Voltage | 5V |
| Circuit | 10 x 1:1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
SN74CBTS6800DBQR Overview
This is a relatively small item of digital switch that is included in the 24-SSOP (0.154, 3.90mm Width) in order to save space on the board.Tape & Reel (TR) is the method used for packaging.Digital switch ic uses a Surface Mount mounting method.The analog IC used in the multiplexers can be referred to as Bus Switch.In the case of -40°C~85°C, turn signal switch will not be affected by external factors.Designers have greater flexibility when digital controlled switch operates at a 4.5V~5.5V supply voltage.The multiplexers can be used for a wide range of applications since they are members of 74CBTS series.There is a design for terminating 24 as part of its basic configuration.You can also find related parts by using its logic switch base part number of 74CBTS6800.In this case, 5V is the voltage supplied to the multiplexer's system.Signal switch has 24 component pins.At the end of a conductor, it uses GULL WING as the point where the conductor ends.As a type of supply, Single is employed.Currently, it is configured with a 24 pin configuration.This unit is mounted in the way of Surface Mount.The logic switch belongs to the family of CBT/FST/QS/5C/B.In this signal multiplexer, there are 10 bits that are provided.The minimal supply voltage (Vsup) should be kept at 4V to avoid some unnecessary failures.The power supply of 5V is provided for mux switch's normal operation.Bus Driver/Transceivers is the classification for this the digital switch ic.If the supply voltage is set to 5V, reliable performance of the multiplexers can be achieved.A resistance of 2 governs its operation.With a resistance of 7Ohm, it operates.There is an output current of 64mA that allows for greater switches' flexibility.
SN74CBTS6800DBQR Features
Supplied in the 24-SSOP (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBTS6800DBQR Applications
There are a lot of Texas Instruments SN74CBTS6800DBQR Signal Switches / Multiplexers / Decoders applications.
- CPU memory location identification
- Injectors
- Analog to digital conversion
- Decimal decoder
- Frequency multiplexing system
- Memory system of computers
- Robotic vehicles
- War field flying robot with a night vision flying camera
- Data communication
- Electronics industry
