SN74CBTS6800DW
| Parameters | |
|---|---|
| Pin Count | 24 |
| Max Output Current | 64mA |
| Operating Supply Voltage | 5V |
| Circuit | 10 x 1:1 |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Ports | 2 |
| Nominal Supply Current | 3μA |
| Output Current | 64mA |
| Number of Bits | 10 |
| Propagation Delay | 250 ps |
| Quiescent Current | 3μA |
| Turn On Delay Time | 6 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Weight | 624.398247mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74CBTS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Termination | SMD/SMT |
| Type | Bus Switch |
| Resistance | 7Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 74CBTS6800 |
SN74CBTS6800DW Overview
Providing this information in the 24-SOIC (0.295, 7.50mm Width) enables digital switch board space to be saved.Tube is the method used for packaging.The method digital switch ic adopts for mounting is Surface Mount.the multiplexers uses an analog IC Bus Switch.The operating temperature of -40°C~85°C will not be susceptible to external factors.Design engineers have more flexibility when digital controlled switch operates at 4.5V~5.5V voltage.Multiplexers of the 74CBTS series can be used in a wide range of applications.There are 24 terminations included in its basic configuration.Its logic switch base part number is 74CBTS6800 which can also be used to find its logic switch related parts.The multiplexer's system works with 5V voltage.This turn signal switch has a total of 24 component pins.GULL WING is used as the point at which the conductors come to an end as part of this formula.As a type of supply, Single is employed.This multiplexer ic has 24 pins configured.The mounting is in the way of Surface Mount.The logic switch is included into the family of CBT/FST/QS/5C/B.In this signal multiplexer, there are 10 bits that are provided.Vsup should be kept at 4V to prevent some unnecessary failures.In order for 5V to operate normally, a power supply is provided.In electronic terms, the digital switch ic is classified as part number Bus Driver/Transceivers.No external influence consumes 3μA current of multiplexer ic.Using a supply voltage of 5V can result in reliable performance of the multiplexers.With a resistance of 0, it operates.A resistance of 7Ohm is used to operate the signal switching.For higher switches' flexibility, 64mA is provided as an output current.
SN74CBTS6800DW Features
Supplied in the 24-SOIC (0.295, 7.50mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBTS6800DW Applications
There are a lot of Texas Instruments SN74CBTS6800DW Signal Switches / Multiplexers / Decoders applications.
- Data bus control
- Video transmission
- Automation system
- A/D converters
- CNC machines
- Microprocessor instruction decoding
- Medium scale TV wall
- Arithmetic Logic Units
- Telephone network
- Microprocessor input/output systems
