SN74CBTU4411ZSTR
| Parameters | |
|---|---|
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74CBTU4411 |
| Pin Count | 72 |
| Operating Supply Voltage | 1.8V |
| Circuit | 11 x 4:1 |
| Number of Channels | 11 |
| Number of Bits | 11 |
| Propagation Delay | 297 ps |
| Quiescent Current | 2.5mA |
| Turn On Delay Time | 2.1 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Supply Type | Single |
| Bandwidth | 400MHz |
| High Level Output Current | -100mA |
| Low Level Output Current | 100mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Normal Position | NC |
| Height | 1.2mm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 800μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 72-TFBGA |
| Number of Pins | 72 |
| Weight | 101.689739mg |
| Operating Temperature | 0°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74CBT |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 72 |
| ECCN Code | EAR99 |
| Type | Multiplexer/Demultiplexer |
| Resistance | 10Ohm |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Voltage - Supply | 1.7V~1.9V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
SN74CBTU4411ZSTR Overview
In order to save board space, digital switch is located in the 72-TFBGA.It is packaged in the way of Tape & Reel (TR).Mounting is performed using Surface Mount.As the analog part, the circuit uses an analog IC Multiplexer/Demultiplexer.In the case of 0°C~85°C, turn signal switch will not be affected by external factors.When digital controlled switch operates at 1.7V~1.9V, designers are provided with a greater degree of flexibility.As a member of 74CBT series, the multiplexers can be used for a wide range of applications.There is a design for terminating 72 as part of its basic configuration.You can also find related parts by using its logic switch base part number of 74CBTU4411.The multiplexer is supplied with 1.8V voltage.This turn signal switch has a total of 72 component pins.BALL is used as the point at which the conductors come to an end as part of this formula.There is a type of supply of Single.This multiplexer ic has 72 pins configured.This unit is mounted in the way of Surface Mount.As a result, signal multiplexer provides 11 bits.It consumes 2.5mA current of multiplexer ic since it is not affected by external factors.The performance of the multiplexers can be reliably maintained at a voltage of 1.8V.This signal switching operates at a resistance of 10Ohm.A total of 11 channels are used for transmission in the turn signal switch's circuit.
SN74CBTU4411ZSTR Features
Supplied in the 72-TFBGA package
Adopting a supply type of Single
Operating with the supply voltage of 1.8V
SN74CBTU4411ZSTR Applications
There are a lot of Texas Instruments SN74CBTU4411ZSTR Signal Switches / Multiplexers / Decoders applications.
- Seven segment displays
- Metal detectors
- Data communication
- GLAN
- Make full adder
- Home automation system
- To select different devices in microprocessor output
- Automation system
- Decimal decoder
- Video transmission
