SN74F109DG4
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Supplier Device Package | 16-SOIC |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74F |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | JK Type |
| Voltage - Supply | 4.5V~5.5V |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Number of Elements | 2 |
| Clock Frequency | 150MHz |
| Current - Quiescent (Iq) | 17mA |
| Current - Output High, Low | 1mA 20mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 8ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| RoHS Status | ROHS3 Compliant |
SN74F109DG4 Overview
The flip flop is packaged in 16-SOIC (0.154, 3.90mm Width). It is included in the package Tube. T flip flop uses Differentialas the output. In the configuration of the trigger, Positive Edgeis used. There is an electronic component mounted in the way of Surface Mount. A voltage of 4.5V~5.5Vis used as the supply voltage. In this case, the operating temperature is 0°C~70°C TA. JK Typeis the type of this D latch. FPGAs belonging to the 74Fseries contain this type of chip. Its output frequency should not exceed 150MHz Hz. D latch consists of 2 elements. As a result, it consumes 17mA of quiescent current without being affected by external factors.
SN74F109DG4 Features
Tube package
74F series
SN74F109DG4 Applications
There are a lot of Rochester Electronics, LLC SN74F109DG4 Flip Flops applications.
- Data storage
- Balanced 24 mA output drivers
- Automotive
- QML qualified product
- Registers
- Bus hold
- Shift registers
- Bounce elimination switch
- Synchronous counter
- Circuit Design
