Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 2 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-SOIC (0.154, 3.90mm Width) |
Number of Pins |
16 |
Weight |
141.690917mg |
Operating Temperature |
0°C~70°C TA |
Packaging |
Tape & Reel (TR) |
Series |
74F |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Type |
JK Type |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
FF/Latches |
Packing Method |
TR |
Technology |
TTL |
Voltage - Supply |
4.5V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Supply Voltage |
5V |
Base Part Number |
74F109 |
Function |
Set(Preset) and Reset |
Output Type |
Differential |
Operating Supply Voltage |
5V |
Polarity |
Non-Inverting |
Power Supplies |
5V |
Number of Circuits |
2 |
Load Capacitance |
50pF |
Output Current |
20mA |
Clock Frequency |
150MHz |
Propagation Delay |
8 ns |
Quiescent Current |
17mA |
Turn On Delay Time |
3 ns |
Family |
F/FAST |
Logic Function |
AND, Flip-Flop, JK-Type |
Current - Output High, Low |
1mA 20mA |
Number of Bits per Element |
1 |
Max Propagation Delay @ V, Max CL |
8ns @ 5V, 50pF |
Trigger Type |
Positive Edge |
Schmitt Trigger |
No |
fmax-Min |
90 MHz |
Clock Edge Trigger Type |
Positive Edge |
Max Frequency@Nom-Sup |
90000000Hz |
Height |
1.75mm |
Length |
9.9mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74F109DR Overview
The package is in the form of 16-SOIC (0.154, 3.90mm Width). Package Tape & Reel (TR)embeds it. The output it is configured with uses Differential. The trigger configured with it uses Positive Edge. The electronic part is mounted in the way of Surface Mount. The JK flip flop operates with an input voltage of 4.5V~5.5V volts. Temperature is set to 0°C~70°C TA. JK Typeis the type of this D latch. The FPGA belongs to the 74F series. A frequency of 150MHzshould not be exceeded by its output. There are 16 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The 74F109family includes it. An input voltage of 5Vpowers the D latch. In terms of electronic devices, this device belongs to the F/FASTfamily of devices. It is mounted in the way of Surface Mount. The electronic flip flop is designed with pins 16. Its clock edge trigger type is Positive Edge. This part is included in FF/Latches. Due to its superior flexibility, it uses 2 circuits. A reliable performance of this D flip flop makes it well suited for use in TR. A total of 5V power supplies are needed to run it. Optimal efficiency requires a supply voltage of 5V. As a result of its output current of 20mA, it is very flexible in terms of design. Quiescent current is consumed by the D latch in the amount of 17mA.
SN74F109DR Features
Tape & Reel (TR) package
74F series
16 pins
5V power supplies
SN74F109DR Applications
There are a lot of Texas Instruments SN74F109DR Flip Flops applications.
- Parallel data storage
- Bus hold
- Memory
- ESCC
- Buffered Clock
- Synchronous counter
- Individual Asynchronous Resets
- Balanced 24 mA output drivers
- Registers
- Circuit Design