SN74F10DR
| Parameters | |
|---|---|
| Family | F/FAST |
| Logic Function | NAND |
| Current - Output High, Low | 1mA 20mA |
| Logic Type | NAND Gate |
| Max I(ol) | 0.02 A |
| Max Propagation Delay @ V, Max CL | 5ns @ 5V, 50pF |
| Schmitt Trigger | NO |
| Logic Level - Low | 0.8V |
| Logic Level - High | 2V |
| Power Supply Current-Max (ICC) | 7.7mA |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 129.387224mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Cut Tape (CT) |
| Series | 74F |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Gates |
| Packing Method | TR |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 3 |
| Supply Voltage | 5V |
| Base Part Number | 74F10 |
| Pin Count | 14 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 5V |
| Number of Elements | 3 |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Output Current | 20mA |
| Propagation Delay | 6 ns |
| Quiescent Current | 5.1mA |
| Turn On Delay Time | 6 ns |
SN74F10DR Overview
Shipping overseas is convenient due to the part's packing in 14-SOIC (0.154, 3.90mm Width). In order to provide high reliability, an advanced packaging method Cut Tape (CT) is used. As a result, it works on the principle of NAND Gate. To ensure the part's full function, a voltage of 4.5V~5.5V is needed. Operation at a temperature around 0°C~70°C. It is mounted in position Surface Mount. High and low output current states are both 1mA 20mA. 74F is the series it belongs to. In total, there have been 14 terminations. A significant improvement in the user experience can be achieved by the part since it has 3 functions. There is a chip in this package that is a part of F/FAST. Try searching with 74F10 if you're looking for device variants. 14 pins are injected into the part body. This logic device is widely used in a wide variety of applications because it is Surface Mount mounted. The datasheets for the 14 pins explain the functions. It has 5.1mA current flowing through it when it is quiescent. A logic device of this type is a Gates. There is 50pF load capacitance associated with the part. The industry TR method is included. It is specified in the datasheet that the part requires It is specified in the datasheet that the part requires 5V power supplies. power supplies. 20mA is the output current of the device. This device has 1 outputs. The total number of elements used for operation is 3. It is specified in the operating instructions of the chip that the operating voltage will be 5V volts.
SN74F10DR Features
NAND Gate Logic Type
Operating Temperature: 0°C~70°C
F/FAST Family
Quiescent Current: 5.1mA
Output Current: 20mA
SN74F10DR Applications
There are a lot of Texas Instruments SN74F10DR Gates and Inverters applications.
- Grid adaptation function
- Electricity for military and civilian life in areas without electricity
- Refrigerator
- Photovoltaic grid-connected power system
- Urban rail vehicle
- Hair dryer
- Scanner
- Automotive voltage monitoring
- Agriculture and light complementary power station
- Printer
