SN74F138D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | 74F |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Decoder/Demultiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Decoder/Drivers |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 74F138 |
| Pin Count | 16 |
| Number of Outputs | 8 |
| Operating Supply Voltage | 5V |
| Circuit | 1 x 3:8 |
| Polarity | Inverting |
| Power Supplies | 5V |
| Number of Circuits | 1 |
| Load Capacitance | 50pF |
| Power Dissipation | 320mW |
| Number of Bits | 8 |
| Propagation Delay | 9 ns |
| Turn On Delay Time | 9 ns |
| Family | F/FAST |
| Logic Function | Decoder, Demultiplexer |
| Number of Inputs | 3 |
| Current - Output High, Low | 1mA 20mA |
| Supply Type | Single |
| Bandwidth | 70MHz |
| Max I(ol) | 0.02 A |
| Power Supply Current-Max (ICC) | 20mA |
| Voltage Supply Source | Single Supply |
| Input Conditioning | STANDARD |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74F138D Overview
As a means of saving space, digital switch is provided in the 16-SOIC (0.154, 3.90mm Width).The package is packaged in the manner of Tube.In terms of mounting, digital switch ic uses the method of Surface Mount.The multiplexers uses an analog IC Decoder/Demultiplexer as the analog part of the circuit.The operating temperature will not be affected by external factors when turn signal switch is set to 0°C~70°C.The turn signal switch is designed for use with a 4.5V~5.5V supply voltage, which gives it a lot of flexibility.Multiplexers of the 74F series can be used in a wide range of applications.This configuration includes 16 terminations as part of its basic functionality.The part number for 74F138 can be used to find its logic switch related parts as well.The voltage supplied for multiplexer's system is 5V.multiplexer's systemIn this turn signal switch, there are 16 components that can be connected to each pin.As the end of conductors, it uses GULL WING.This supply type employs Single.There are 16 pins on it.The mounting point is Surface Mount.Among the family of F/FAST the logic switch is a member.Signal multiplexer consists of 8 bits.In order for 5V to operate normally, a power supply is provided.There are 8 outputs designed to operate the turn signal switch.In electronic terms, the digital switch ic is classified as Decoder/Drivers.If the supply voltage is set to 5V, reliable performance of the multiplexers can be achieved.This multiplexer is equipped with 3 inputs and 3 outputs.During normal operation, the digitalswitch consists of 1 circuits.
SN74F138D Features
Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74F138D Applications
There are a lot of Texas Instruments SN74F138D Signal Switches / Multiplexers / Decoders applications.
- Electronics industry
- Memory chips
- A/D converters
- Idle motor
- Robotic vehicles
- Time division multiplexing system
- Arithmetic Logic Units
- Data-routing applications
- Communication system
- Automatic health monitoring systems
