banner_page

SN74F151BDR

16 Terminations4.5V~5.5V 16 Pin 74F151 Signal switch74F Series 1 Outputs1 Functions


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74F151BDR
  • Package: 16-SOIC (0.154, 3.90mm Width)
  • Datasheet: -
  • Stock: 989
  • Description: 16 Terminations4.5V~5.5V 16 Pin 74F151 Signal switch74F Series 1 Outputs1 Functions(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 1 week ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-SOIC (0.154, 3.90mm Width)
Number of Pins 16
Weight 141.690917mg
Operating Temperature 0°C~70°C
Packaging Cut Tape (CT)
Series 74F
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
ECCN Code EAR99
Type Multiplexer
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Packing Method TR
Technology TTL
Voltage - Supply 4.5V~5.5V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Base Part Number 74F151
Pin Count 16
Number of Outputs 1
Operating Supply Voltage 5V
Circuit 1 x 8:1
Polarity Non-Inverting
Power Supplies 5V
Number of Circuits 1
Load Capacitance 50pF
Number of Bits 2
Propagation Delay 7 ns
Quiescent Current 13.5mA
Family F/FAST
Number of Inputs 8
Output Characteristics 3-STATE
Current - Output High, Low 1mA 24mA
Supply Type Single
Bandwidth 70MHz
Prop. Delay@Nom-Sup 9.5 ns
Voltage Supply Source Single Supply
Height 1.75mm
Length 9.9mm
Width 3.91mm
Thickness 1.58mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Contains Lead

SN74F151BDR Overview


Providing this information in the 16-SOIC (0.154, 3.90mm Width) enables digital switch board space to be saved.As a result, it is packaged in the way of Cut Tape (CT).The method digital switch ic adopts for mounting is Surface Mount.The analog IC in the multiplexers is identified as Multiplexer.In the case of 0°C~70°C, turn signal switch will not be affected by external factors.A supply voltage of 4.5V~5.5V provides digital controlled switch's superior flexibility for designers.As a member of 74F series, the multiplexers can be used for a wide range of applications.There is a design for terminating 16 as part of its basic configuration.In addition, it also has a base part number of 74F151, which can be used to find related parts.The turn signal switch is supplied with a voltage of 5V volts.A component pin count of 16 can be found on this turn signal switch.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.Single is used as its supply type.There are 16 pins on it.The mount is in Surface Mount.The logic switch is a member of the F/FAST family.In this signal multiplexer, there are 2 bits provided.mux switch's normal operation requires the power supply of 5V.The turn signal switch contains 1 outputs designed to operate.In the absence of external influences, it consumes 13.5mA current of multiplexer ic.With a supply voltage of 5V, reliable performance of the multiplexers can be achieved.There are 8 inputs provided in this multiplexer.The switches package is packaged in accordance with TR.It is necessary for the digitalswitch to operate normally that 1 circuits be formed.

SN74F151BDR Features


Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V

SN74F151BDR Applications


There are a lot of Texas Instruments SN74F151BDR Signal Switches / Multiplexers / Decoders applications.

  • Data bus control
  • Electronic circuits
  • Medium scale TV wall
  • Solenoid cooling fan
  • Small scale TV wall
  • PCIe
  • To select different devices in microprocessor input
  • Speed synchronization of multiple motors in industries
  • GLAN
  • Arithmetic Logic Units

Write a review

Note: HTML is not translated!
    Bad           Good