SN74F151BDRE4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Series | 74F |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Multiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Packing Method | TR |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 74F151 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Circuit | 1 x 8:1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Bits | 2 |
| Propagation Delay | 7 ns |
| Family | F/FAST |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 1mA 24mA |
| Supply Type | Single |
| Bandwidth | 70MHz |
| Output Polarity | COMPLEMENTARY |
| Prop. Delay@Nom-Sup | 9.5 ns |
| Number of Input Lines | 8 |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74F151BDRE4 Overview
In order to save board space, digital switch is located in the 16-SOIC (0.154, 3.90mm Width).Tape & Reel (TR) is the method used for packaging.As far as mounting is concerned, digital switch ic uses Surface Mount.the multiplexers uses an analog IC Multiplexer.The operating temperature of 0°C~70°C will not be susceptible to external factors.Designers have greater flexibility when digital controlled switch operates at a 4.5V~5.5V supply voltage.In addition to being a member of the 74F series, these multiplexers have a wide range of applications.It is designed with 16 terminations as part of its basic configuration.In addition, it also has a base part number of 74F151, which can be used to find related parts.The multiplexer's system is supplied with a voltage of 5V.Signal switch has 16 component pins.As the end of conductors, it uses GULL WING.In this case, Single is employed as the supply type.A configuration of 16 pins is used.The multiplexer ic is mounted in the direction of Surface Mount.The logic switch is included into the family of F/FAST.There are 2 bits in signal multiplexer.The minimal supply voltage (Vsup) should be kept at 4.5V to avoid some unnecessary failures.It is advisable that the maximal supply voltage (Vsup) remains at 5.5V to avoid some unnecessary failures.The power supply of 5V is provided for mux switch's normal operation.This turn signal switch has 1 outputs designed for its operation.The switches is packaged according to the way of TR.As a voltage level input, the multiplexers have 8 lines.
SN74F151BDRE4 Features
Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 5V
8 input lines
SN74F151BDRE4 Applications
There are a lot of Texas Instruments SN74F151BDRE4 Signal Switches / Multiplexers / Decoders applications.
- HDMI applications
- Implementing boolean functions with multiple variables
- Seven segment displays
- Analog to digital conversion
- Data distribution
- Recording transmission
- Electronically controlled engine system
- Medium scale TV wall
- Signal router
- Encrypted communications system
