SN74F151BDRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Series | 74F |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Multiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Packing Method | TR |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 74F151 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 5V |
| Circuit | 1 x 8:1 |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Bits | 2 |
| Propagation Delay | 7 ns |
| Family | F/FAST |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 1mA 24mA |
| Supply Type | Single |
| Bandwidth | 70MHz |
| Output Polarity | COMPLEMENTARY |
| Prop. Delay@Nom-Sup | 9.5 ns |
| Number of Input Lines | 8 |
| Voltage Supply Source | Single Supply |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74F151BDRG4 Overview
Due to the fact that it is provided in the 16-SOIC (0.154, 3.90mm Width), digital switch allows the board to be compacted.Tape & Reel (TR) is the packaging method.The method digital switch ic adopts for mounting is Surface Mount.the multiplexers uses an analog IC Multiplexer.The operating temperature will not be affected by external factors when turn signal switch is set to 0°C~70°C.When digital controlled switch operates at 4.5V~5.5V, designers are provided with a greater degree of flexibility.As a member of 74F series, the multiplexers can be used for a wide range of applications.There are 16 terminations included in its basic configuration.Its logic switch base part number is 74F151 which can also be used to find its logic switch related parts.In multiplexer's system, 5V is the voltage supplied.This turn signal switch has a total of 16 component pins.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.In this case, the supply type is Single.It is configured with 16 pins.The mount is in Surface Mount.The logic switch is included into the family of F/FAST.As a result, signal multiplexer provides 2 bits.The power supply of 5V is provided for mux switch's normal operation.This turn signal switch has 1 outputs designed for its operation.If the supply voltage is 5V, reliable performance of the multiplexers can be achieved.TR is used to package the switches.To accept voltage levels, the multiplexers have8 input lines.
SN74F151BDRG4 Features
Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
8 input lines
SN74F151BDRG4 Applications
There are a lot of Texas Instruments SN74F151BDRG4 Signal Switches / Multiplexers / Decoders applications.
- Frequency multiplexing system
- Recording transmission
- Small scale TV wall
- Image transmission
- Data transfer
- Combinational circuit
- Logic gates for other digital devices
- Automatic Monitoring systems
- Data distribution
- Solenoid cooling fan
