SN74F153D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | 74F |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Multiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | 74F153 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Circuit | 2 x 4:1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Number of Channels | 2 |
| Load Capacitance | 50pF |
| Number of Bits | 1 |
| Throw Configuration | 4PST |
| Propagation Delay | 7 ns |
| Quiescent Current | 12mA |
| Family | F/FAST |
| Number of Inputs | 8 |
| Current - Output High, Low | 1mA 20mA |
| Supply Type | Single |
| Bandwidth | 70MHz |
| Number of Input Lines | 4 |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74F153D Overview
Digital switch is provided in the 16-SOIC (0.154, 3.90mm Width) for the purpose of saving board space.As a result, it is packaged in a way that is referred to as Tube.Digital switch ic uses a Surface Mount mounting method.In the multiplexers, the analog IC is indicated by Multiplexer.In the case of 0°C~70°C, turn signal switch will not be affected by external factors.A supply voltage of 4.5V~5.5V provides digital controlled switch's superior flexibility for designers.Several applications are possible for 74F series multiplexers.The basic configuration includes 16 terminations.As its base part number is 74F153, logic switch can also be used to find its related parts.The multiplexer is supplied with 5V voltage.This turn signal switch has a total of 16 component pins.GULL WING is used as the point at which the conductors come to an end as part of this formula.The supply type of this multiplexer ic is Single.Currently, it is configured with 16 pins.The multiplexer ic is mounted in the direction of Surface Mount.The logic switch is included into the family of F/FAST.In the signal multiplexer, there are 1 bits available.It is advisable to keep the maximum supply voltage (Vsup) at 5.5V in order to prevent some unnecessary failures.mux switch's normal operation requires the power supply of 5V.The turn signal switch operates with 1 outputs.In the absence of external influences, it consumes 12mA current of multiplexer ic.It is provided with 8 inputs.On the multiplexers, 4 input lines are provided for accepting voltage levels.A total of 2 transmission channels are available in the turn signal switch's circuit.
SN74F153D Features
Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 5V
4 input lines
SN74F153D Applications
There are a lot of Texas Instruments SN74F153D Signal Switches / Multiplexers / Decoders applications.
- Data-routing applications
- A robotic vehicle with the metal detector
- Code converters
- Arithmetic Logic Units
- Electronic circuits
- Analog, digital or video signal switching
- Electronics industry
- Enabling block of memory depending on address in memory chips
- Automatic Monitoring systems
- Make full adder
