SN74F153DG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Packing Method | TUBE |
| Technology | TTL |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Pin Count | 16 |
| Number of Outputs | 2 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 1 |
| Propagation Delay | 7 ns |
| Family | F/FAST |
| Logic Function | Multiplexer |
| Number of Inputs | 8 |
| Supply Type | Single |
| Bandwidth | 70MHz |
| Output Polarity | TRUE |
| High Level Output Current | 1mA |
| Low Level Output Current | 1mA |
| Number of Input Lines | 4 |
| Height | 1.58mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74F153DG4 Overview
It is included in the SOIC in order to save board space.The basic configuration of this system includes 16 terminations.The multiplexer is supplied with 5V voltage.In this turn signal switch, there are 16 components that can be connected to each pin.Conductors terminate at GULL WING in this design.Its supply type is Single, which is used as the source of power.Currently, it is configured with 16 pins.As you can see, it is mounted in the direction of Surface Mount.Among the family of F/FAST the logic switch is a member.The multiplexer ic provides 1 bits.In order for 5V to operate normally, a power supply is provided.As part of the operation of this turn signal switch, there are 2 outputs.If the supply voltage is 5V, reliable performance of the multiplexers can be achieved.This multiplexer has a total of 8 inputs.TUBE is used to package the switches.A voltage level can be inserted into the 4 input lines of multiplexers.There is no problem with operating this signal switch at the maximum temperature of 70°C.Ideally, the temperature of the multiplexer should not exceed 0°C.Based on the device specifications, the signal switches is designed to operate at 5.5V maximum supply voltage.A minimum supply voltage of 4.5V is required to operate the digital swith.
SN74F153DG4 Features
Supplied in the SOIC package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
4 input lines
SN74F153DG4 Applications
There are a lot of Texas Instruments SN74F153DG4 Signal Switches / Multiplexers / Decoders applications.
- GLAN
- Electronically controlled engine system
- Time division multiplexing system
- Automation system
- Logic gates for other digital devices
- Memory chips
- Data communication
- Relay
- RF-based home automation system
- D/A converters
