Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 week ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-SOIC (0.154, 3.90mm Width) |
Number of Pins |
16 |
Weight |
141.690917mg |
Operating Temperature |
0°C~70°C |
Packaging |
Cut Tape (CT) |
Series |
74F |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Type |
Multiplexer |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Packing Method |
TR |
Technology |
TTL |
Voltage - Supply |
4.5V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Base Part Number |
74F153 |
Pin Count |
16 |
Number of Outputs |
1 |
Operating Supply Voltage |
5V |
Circuit |
2 x 4:1 |
Polarity |
Non-Inverting |
Power Supplies |
5V |
Number of Channels |
2 |
Load Capacitance |
50pF |
Number of Bits |
1 |
Throw Configuration |
4PST |
Propagation Delay |
12 ns |
Quiescent Current |
12mA |
Family |
F/FAST |
Number of Inputs |
8 |
Current - Output High, Low |
1mA 20mA |
Supply Type |
Single |
Bandwidth |
70MHz |
Number of Input Lines |
4 |
Voltage Supply Source |
Single Supply |
Independent Circuits |
1 |
Height |
1.75mm |
Length |
9.9mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74F153DR Overview
Due to the lack of space on the board, digital switch is provided in the 16-SOIC (0.154, 3.90mm Width).It is packaged according to the Cut Tape (CT) method.digital switch ic uses the method of Surface Mount for mounting.the multiplexers uses IC Multiplexer as the analog IC.As long as the operating temperature is 0°C~70°C, turn signal switch will not be influenced by external factors.Using a 4.5V~5.5V supply voltage provides digital controlled switch's superior flexibility for designers.As a member of 74F series, the multiplexers can be used for a wide range of applications.The basic configuration of this system includes 16 terminations.The part number for 74F153 can be used to find its logic switch related parts as well.The multiplexer's system is powered by 5V voltage.In this turn signal switch, there are 16 component pins.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.As a type of supply, Single is employed.This multiplexer ic has 16 pins configured.The mount is in Surface Mount.The logic switch is included into the family of F/FAST.As a result, signal multiplexer provides a total of 1 bits.mux switch's normal operation requires the power supply of 5V.For the turn signal switch's operation, there are 1 outputs.Without any external influences, it consumes 12mA current of multiplexer ic at all times.The performance of the multiplexers can be reliably maintained at a voltage of 5V.This multiplexer has a total of 8 inputs.According to TR, the switches is packaged.It is possible to accept voltage levels by using one of the 4 input lines of multiplexers.The turn signal switch's circuit consists of 2 transmission channels.
SN74F153DR Features
Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
4 input lines
SN74F153DR Applications
There are a lot of Texas Instruments SN74F153DR Signal Switches / Multiplexers / Decoders applications.
- Telephone network
- HDMI applications
- Data demultiplexing
- Code conversion
- A/D converters
- Metal detectors
- Transmission from the computer system of a satellite
- A robotic vehicle with the metal detector
- Paper plants
- Analog, digital or video signal switching