SN74F153N
| Parameters | |
|---|---|
| Power Supplies | 5V |
| Number of Channels | 2 |
| Load Capacitance | 50pF |
| Number of Bits | 1 |
| Throw Configuration | 4PST |
| Propagation Delay | 7 ns |
| Quiescent Current | 12mA |
| Family | F/FAST |
| Number of Inputs | 8 |
| Current - Output High, Low | 1mA 20mA |
| Supply Type | Single |
| Bandwidth | 70MHz |
| Number of Input Lines | 4 |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Weight | 951.693491mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | 74F |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Multiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | 74F153 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 5V |
| Circuit | 2 x 4:1 |
| Polarity | Non-Inverting |
SN74F153N Overview
Due to the fact that it is provided in the 16-DIP (0.300, 7.62mm), digital switch allows the board to be compacted.The package is in the form of Tube.In terms of mounting, digital switch ic uses the method of Through Hole.The analog IC in the multiplexers is identified as Multiplexer.By keeping the operating temperature at 0°C~70°C, turn signal switch will not be affected by external factors.When digital controlled switch operates at 4.5V~5.5V, designers have superior flexibility.In addition to being a member of the 74F series, these multiplexers have a wide range of applications.Among its basic features are 16 terminations.There is a base part number of 74F153 which can also be used in order to locate the logic switch that are related to this item.For multiplexer's system, 5V voltage is supplied.A component pin count of 16 can be found on this turn signal switch.There is a type of supply Single that is employed in this case.A total of 16 pins are configured on this board.The mount is in Through Hole.The logic switch is a member of the F/FAST family.In this signal multiplexer, there are 1 bits that are provided.In order for 5V to operate normally, a power supply is provided.In order for the turn signal switch to work, there are 1 outputs.It consumes 12mA current of multiplexer ic without external influences.If the supply voltage is set to 5V, reliable performance of the multiplexers can be achieved.The multiplexer is equipped with 8 inputs.Voltage levels are accepted through 4 input lines of multiplexers.In the turn signal switch's circuit, there are 2 channels used for transmission.
SN74F153N Features
Supplied in the 16-DIP (0.300, 7.62mm) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
4 input lines
SN74F153N Applications
There are a lot of Texas Instruments SN74F153N Signal Switches / Multiplexers / Decoders applications.
- Make half adder
- Code converters
- RF-based home automation system
- Data demultiplexing
- Memory chips
- A robotic vehicle with the metal detector
- Logic gates for other digital devices
- Automatic Monitoring systems
- Idle motor
- Solenoid cooling fan
