SN74F157ADR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Cut Tape (CT) |
| Series | 74F |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Multiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Packing Method | TR |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | 74F157 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 5V |
| Circuit | 4 x 2:1 |
| Polarity | Non-Inverting |
| Number of Channels | 4 |
| Load Capacitance | 50pF |
| Number of Bits | 1 |
| Throw Configuration | DPST |
| Propagation Delay | 6 ns |
| Quiescent Current | 15.5mA |
| Family | F/FAST |
| Number of Inputs | 8 |
| Current - Output High, Low | 1mA 20mA |
| Supply Type | Single |
| Bandwidth | 70MHz |
| Number of Input Lines | 2 |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74F157ADR Overview
Digital switch is provided in the 16-SOIC (0.154, 3.90mm Width) for the purpose of saving board space.As a result, it is packaged in the way of Cut Tape (CT).Digital switch ic uses a Surface Mount mounting method.In the multiplexers, the analog IC Multiplexer is used.If the operating temperature is maintained at 0°C~70°C, turn signal switch will not be susceptible to external factors.Using a 4.5V~5.5V supply voltage provides digital controlled switch's superior flexibility for designers.The multiplexers can be used for a wide range of applications since they are members of 74F series.Among its basic features are 16 terminations.The base part number is 74F157, which is also useful when looking up signal switch's related components.The multiplexer's system works with 5V voltage.In this turn signal switch, there are 16 components that can be connected to each pin.It is the end of conductors that is represented by GULL WING.In this case, the supply type is Single.A total of 16 pins are configured on this board.The mounting is in the way of Surface Mount.The logic switch is a member of the F/FAST family.Signal multiplexer contains 1 bits.The turn signal switch operates with 1 outputs.Not being affected by the external factors, consumes 15.5mA current of multiplexer ic.Reliable performance of the multiplexers can be achieved when a supply voltage of 5V is provided.It is provided with 8 inputs.The switches package is packaged in accordance with the TR method.For the purpose of accepting voltage levels, the multiplexers have 2 input lines.This turn signal switch's circuit uses 4 transmission channels.
SN74F157ADR Features
Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 5V
2 input lines
SN74F157ADR Applications
There are a lot of Texas Instruments SN74F157ADR Signal Switches / Multiplexers / Decoders applications.
- Analog to digital conversion
- Code conversion
- Logic circuits
- HD surveillance system
- Idle motor
- Enabling different functions units in microprocessor instruction decoding
- Telephone network
- Home automation system
- Electronically controlled engine system
- Data-routing applications
