SN74F161AN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Supplier Device Package | 16-PDIP |
| Weight | 951.693491mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | 74F |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Voltage - Supply | 4.5V~5.5V |
| Frequency | 120MHz |
| Base Part Number | 74F161 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Number of Circuits | 4 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 4 |
| Propagation Delay | 15 ns |
| Turn On Delay Time | 15 ns |
| Reset | Asynchronous |
| Logic Function | Counter |
| Direction | Up |
| Logic Type | Binary Counter |
| Number of Bits per Element | 4 |
| Trigger Type | Positive Edge |
| Sync/Async | Synchronous |
| Clock Edge Trigger Type | Positive Edge |
| Count Rate | 100MHz |
| Timing | Synchronous |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74F161AN Overview
This is a device supplied in the 16-DIP (0.300, 7.62mm) package. In this diagram, there are 1elements that are interconnected by wires. There is a package in the form of Tube. Circuit components are connected by 16pins. Through Holeis the way in which it is mounted. As a member of the 74Fseries, it is ideal for a wide range of applications. The logic type of Binary Counter is adopted. 0°C~70°Cshould be set as the operating temperature. There is a mounting type of Through Holeon this device. In the case of a supply voltage of [0], it operates more reliably. The array contains elements that store 4bits each. There are 4bits of information contained in the device. Further related parts may be found under the base part number 74F161. In order to operate, it requires a voltage of [0]. The electrical characteristics remain stable at maximum temperature 70°Cfor extended periods. It operates within a specified temperature range, with the lower limit typically set at 0°C degrees Celsius. In this case, the frequency is 120MHz Hz. 5.5Vis the maximum voltage available to the device. The minimum voltage available for the device is as low as 4.5V. For normal operation, it is equipped with 4circuits.
SN74F161AN Features
Embedded in the 16-DIP (0.300, 7.62mm) package
4 bits per element
Operating supply voltage of 5V
Frequency of 120MHz
SN74F161AN Applications
There are a lot of Texas Instruments SN74F161AN Counters & Dividers applications.
- VHF, UHF, FM, AM, etc.
- Signal gating
- Digital multiplexing and demultiplexing
- Timers
- Time-delay circuits
- Clocks
- Fixed and programmable counters greater than 10
- Frequency division
- Divide-by-N counting
- Fixed and programmable divide-by-10,9,8,7,6,5,4,3,2 counters
