SN74F169N
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Weight | 951.693491mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | 74F |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Termination | Through Hole |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | TCO OUTPUT |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 90MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74F169 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Propagation Delay | 17 ns |
| Family | F/FAST |
| Logic Function | Counter |
| Direction | Up, Down |
| Logic Type | Binary Counter |
| Max I(ol) | 0.02 A |
| Number of Bits per Element | 4 |
| Trigger Type | Positive Edge |
| Power Supply Current-Max (ICC) | 52mA |
| Clock Edge Trigger Type | Positive Edge |
| Count Rate | 100MHz |
| Load/Preset Input | YES |
| Timing | Synchronous |
| Height Seated (Max) | 5.08mm |
| Width | 7.62mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74F169N Overview
The device is packaged in the 16-DIP (0.300, 7.62mm)type. In order to configure it, it uses 16terminations. Having a voltage supply of 5Vallows it to operate in a highly flexible manner. In wires, 1elements are connected. There are a total of 16 pins in all components. It is packaged in a manner consistent with Tube. In the circuit, there are 16pins that connect other components. The device is mounted in the direction of [0]. The F/FASTfamily is derived from it. Having been designed as a member of the 74Fseries, it is well suited to a variety of applications. Binary Counteris adopted as the logic type. A temperature of 0°C~70°Cshould be set for the operating environment. A mounting type of Through Holeis adopted. Providing a voltage of 4.5V~5.5Vensures higher reliability of operation. The array has 4elements. The result may be noin terms of Pbfree code. In terms of this electronic device, the features provided by TCO OUTPUTare of the utmost importance. The base part number of 74F169provides access to more related parts. Voltage from the voltage source is [0]. To operate, the device requires a voltage of [0]. With a frequency of [0], it operates.
SN74F169N Features
Embedded in the 16-DIP (0.300, 7.62mm) package
4 bits per element
TCO OUTPUT
Operating supply voltage of 5V
Frequency of 90MHz
SN74F169N Applications
There are a lot of Texas Instruments SN74F169N Counters & Dividers applications.
- LINEARIZATION
- Time delay circuits
- Frequency dividing circuits
- ANALOG SIGNAL PROCESSING
- Binary counter/decoder
- MULTIPLICATION
- VHF, UHF, FM, AM, etc.
- Fixed or Programmable Frequency Division
- Analog multiplexing and demultiplexing
- TRUE RMS-TO-DC CONVERSION
