SN74F174AD
| Parameters | |
|---|---|
| Number of Output Lines | 6 |
| fmax-Min | 80 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 80000000Hz |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74F |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latch |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74F174 |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 7 |
| Load Capacitance | 50pF |
| Output Current | 20mA |
| Number of Bits | 6 |
| Clock Frequency | 140MHz |
| Propagation Delay | 15 ns |
| Turn On Delay Time | 2.7 ns |
| Family | F/FAST |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 45mA |
| Current - Output High, Low | 1mA 20mA |
| Max I(ol) | 0.02 A |
| Max Propagation Delay @ V, Max CL | 10ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Power Supply Current-Max (ICC) | 55mA |
SN74F174AD Overview
It is embeded in 16-SOIC (0.154, 3.90mm Width) case. As part of the package Tube, it is embedded. Non-Invertedis the output configured for it. It is configured with a trigger that uses a value of Positive Edge. There is an electric part mounted in the way of Surface Mount. Powered by a 4.5V~5.5Vvolt supply, it operates as follows. It is operating at 0°C~70°C TA. A flip flop of this type is classified as a D-Type. It is a type of FPGA belonging to the 74F series. In order for it to function properly, its output frequency should not exceed 140MHz. A total of 1elements are present in it. During its operation, it consumes 45mA quiescent energy. In 16terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. You can search similar parts based on 74F174. Power is supplied from a voltage of 5V volts. In this case, the D flip flop belongs to the F/FASTfamily. A part of the electronic system is mounted in the way of Surface Mount. The electronic flip flop is designed with pins 16. This device has the clock edge trigger type of Positive Edge. The part you are looking for is included in FF/Latch. 6bits are used in its design. In order to achieve its superior flexibility, 7 circuits are used. In order for the device to operate, it requires 5V power supplies. For high efficiency, the supply voltage should be kept at 5V. Featuring the maximum design flexibility, it has an output current of 20mA . There are 6 output lines on it.
SN74F174AD Features
Tube package
74F series
16 pins
6 Bits
5V power supplies
SN74F174AD Applications
There are a lot of Texas Instruments SN74F174AD Flip Flops applications.
- Guaranteed simultaneous switching noise level
- Circuit Design
- Computing
- Balanced Propagation Delays
- Instrumentation
- Patented noise
- Power down protection
- Supports Live Insertion
- Safety Clamp
- Cold spare funcion
