SN74F174ADE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | FF/Latch |
| Packing Method | TUBE |
| Technology | TTL |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 140MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Output Type | TTL |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Number of Circuits | 7 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Current - Output | 20mA |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 2.7 ns |
| Family | F/FAST |
| Logic Function | D-Type, Flip-Flop |
| Logic IC Type | D FLIP-FLOP |
| Max I(ol) | 0.02 A |
| Number of Bits per Element | 6 |
| High Level Output Current | -1mA |
| Low Level Output Current | 20mA |
| Power Supply Current-Max (ICC) | 55mA |
| fmax-Min | 80 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74F174ADE4 Overview
The item is packaged in SOICcases. It is configured with TTLas an output. D latch consists of 1 elements. Currently, there are 16 terminations. It is powered by a voltage of 5V . Electronic devices of this type belong to the F/FASTfamily. It is mounted by the way of Surface Mount. It is designed with 16 pins. In this device, the clock edge trigger type is Positive Edge. The RS flip flops belongs to FF/Latch base part number. Its flexibility is enhanced by 7 circuits. Considering the reliability of this T flip flop, it is well suited for TUBE. The power supply is 5V. If high efficiency is to be achieved, the supply voltage should be maintained at 5V. It is set to -1mAfor the high level output current. A 20mAvalue is set for low-level output current. The operating temperature should be lower than 70°C. Temperatures above 0°Cshould be used. The RS flip flop is designed to operate with a minimal supply voltage of 4.5VV. 5.5Vis the maximum supply voltage supported by it. The frequency can be set to 140MHz. The logic IC it adopts is D FLIP-FLOP. Currently, it is equipped with 1 functions . A total of 16 pins are present on this device. It features maximum design flexibility due to the 20mA output current.
SN74F174ADE4 Features
16 pins
5V power supplies
1 Functions
16 pin count
SN74F174ADE4 Applications
There are a lot of Texas Instruments SN74F174ADE4 Flip Flops applications.
- ESCC
- Functionally equivalent to the MC10/100EL29
- Reduced system switching noise
- Bus hold
- Synchronous counter
- Single Up Count-Control Line
- Frequency Divider circuits
- Frequency division
- Buffer registers
- Computing
