SN74F175D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74F |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74F175 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 4 |
| Load Capacitance | 50pF |
| Output Current | 20mA |
| Number of Bits | 1 |
| Clock Frequency | 140MHz |
| Propagation Delay | 8.5 ns |
| Turn On Delay Time | 3.2 ns |
| Family | F/FAST |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 34mA |
| Current - Output High, Low | 1mA 20mA |
| Max I(ol) | 0.02 A |
| Max Propagation Delay @ V, Max CL | 8.5ns @ 5V, 50pF |
| Prop. Delay@Nom-Sup | 9.5 ns |
| Trigger Type | Positive Edge |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74F175D Overview
16-SOIC (0.154, 3.90mm Width)is the packaging method. Package Tubeembeds it. It is configured with Differentialas an output. This trigger uses the value Positive Edge. Surface Mountis positioned in the way of this electronic part. The supply voltage is set to 4.5V~5.5V. A temperature of 0°C~70°C TAis used in the operation. It belongs to the type D-Typeof flip flops. The FPGA belongs to the 74F series. It should not exceed 140MHzin terms of its output frequency. A total of 1elements are present in it. As a result, it consumes 34mA quiescent current. The number of terminations is 16. JK flip flop belongs to 74F175 family. An input voltage of 5Vpowers the D latch. It is a member of the F/FASTfamily of D flip flop. The electronic part is mounted in the way of Surface Mount. A total of 16pins are provided on this board. This device has Positive Edgeas its clock edge trigger type. The part you are looking for is included in FF/Latches. It is designed with a number of bits of 1. Its flexibility is enhanced by 4 circuits. It operates from 5V power supplies. High efficiency requires the supply voltage to be maintained at 5V. As a result of its output current of 20mA, it is very flexible in terms of design.
SN74F175D Features
Tube package
74F series
16 pins
1 Bits
5V power supplies
SN74F175D Applications
There are a lot of Texas Instruments SN74F175D Flip Flops applications.
- Frequency Divider circuits
- Consumer
- ESCC
- Control circuits
- Bus hold
- Digital electronics systems
- Synchronous counter
- Data Synchronizers
- High Performance Logic for test systems
- Storage registers
