SN74F2373DWR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Series | 74F |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74F2373 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Ports | 2 |
| Nominal Supply Current | 66mA |
| Output Current | 12mA |
| Number of Bits | 8 |
| Propagation Delay | 7 ns |
| Turn On Delay Time | 7.3 ns |
| Family | F/FAST |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE WITH SERIES RESISTOR |
| Current - Output High, Low | 3mA 12mA |
| Logic Type | D-Type Transparent Latch |
| Prop. Delay@Nom-Sup | 9 ns |
| Independent Circuits | 1 |
| Number of Output Lines | 8 |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
SN74F2373DWR Overview
In the 20-SOIC (0.295, 7.50mm Width) package, it can be found as an embedded module. It is packaged in the way of Tape & Reel (TR). Tri-State is the output configured for it. This electrical device has a logic type of D-Type Transparent Latch. This electronic part is mounted in the way of Surface Mount. In order for it to operate, it needs a supply voltage of 4.5V~5.5V. It is 0°C~70°C at the operating temperature. An FPGA of this type belongs to the 74F series. This electronic part is designed with 8 Bits. In this device, there are 20 terminations that have been designed. It belongs to 74F2373 family. The supply voltage of the device is 5V. The device is equipped with 20 pins. In the world of electronics, this electronic device belongs to the family of F/FAST. In addition, it is designed with a pin number of 20. Mounting this electronic component follows the Surface Mount method. 2 ports are available on this device. This part is included in FF/Latches. It reaches 5.5V when the supply voltage (Vsup) reaches maximum. There are 5V power supplies attached to it. The supply voltage (Vsup) should be greater than 4.5V. Based on its reliable performance, this device is appropriate for TAPE AND REEL. The output current of 12mA makes it feature maximum design flexibility. Regardless of the input line, the binary equivalent of the input line will be generated by the 8 output lines.
SN74F2373DWR Features
20-SOIC (0.295, 7.50mm Width) package
74F series
8 Bits
74F2373 family
20 pin count
20 pins
5V power supplies
SN74F2373DWR Applications
There are a lot of Texas Instruments SN74F2373DWR Latches applications.
- Meter applications
- Four-bit storage with output enable
- Registers
- Pseudo-random code generators
- Counting
- Accumulator Registers
- Bus system register with enable parallel lines at bus side
- Control circuits
- Multi-line decoders
- Parallel data synchronization
