SN74F2373N
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | 74F |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Subcategory | FF/Latches |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74F2373 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Ports | 2 |
| Nominal Supply Current | 66mA |
| Output Current | 12mA |
| Number of Bits | 8 |
| Propagation Delay | 7 ns |
| Turn On Delay Time | 7.3 ns |
| Family | F/FAST |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE WITH SERIES RESISTOR |
| Current - Output High, Low | 3mA 12mA |
| Logic Type | D-Type Transparent Latch |
| Prop. Delay@Nom-Sup | 9 ns |
| Independent Circuits | 1 |
| Number of Output Lines | 8 |
| Length | 25.4mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
SN74F2373N Overview
It is embedded in the 20-DIP (0.300, 7.62mm) package. It is packaged in the way of Tube. In this configuration, the output is set to Tri-State. D-Type Transparent Latch is the logic type of this electrical device. The way in which this electronic part is mounted is Through Hole. A 4.5V~5.5V voltage supply is required for operation. A temperature of 0°C~70°C is set as the operating temperature. 74F is the series number of this FPGA. The design of this electronic part contains 8 bits. As far as this device is concerned, it has no terminations. It is a member of the 74F2373 family. With a supply voltage of 5V, it operates. The 20 pind are equipped with it. F/FAST is the family name of this electronic device. The pin configuration of the device is 20. Through Hole is the way in which this electronic part is mounted. In this device, there are 2 ports. There is a subcategory of FF/Latches for this part. The maximal supply voltage (Vsup) reaches 5.5V. A total of 5V power supplies are required for it to operate. It is recommended to have a higher supply voltage (Vsup) than 4.5V. The 12mA output current gives it maximum design flexibility. It follows that 8 output lines are generated from the binary equivalent of the input line.
SN74F2373N Features
20-DIP (0.300, 7.62mm) package
74F series
8 Bits
74F2373 family
20 pin count
20 pins
5V power supplies
SN74F2373N Applications
There are a lot of Texas Instruments SN74F2373N Latches applications.
- Automotive ADAS
- Buffer register
- Serial Output Register
- Relay replacement
- Motor Drives
- Communication systems
- Display driver
- Parallel data storage
- Accumulator Registers
- Avionics
