SN74F258DG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | 74F |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Multiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | 74F258 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Circuit | 4 x 2:1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Bits | 4 |
| Propagation Delay | 5.3 ns |
| Family | F/FAST |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 3mA 24mA |
| Supply Type | Single |
| Bandwidth | 70MHz |
| Output Polarity | INVERTED |
| Prop. Delay@Nom-Sup | 6 ns |
| Number of Input Lines | 2 |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74F258DG4 Overview
This is a relatively small item of digital switch that is included in the 16-SOIC (0.154, 3.90mm Width) in order to save space on the board.Tube represents its packaging.Digital switch ic uses a Surface Mount mounting method.As the analog part, the circuit uses an analog IC Multiplexer.When the operating temperature is kept at 0°C~70°C, turn signal switch will not be susceptible to external factors.With a supply voltage of 4.5V~5.5V, designers have greater flexibility of digital controlled switch.Since they are members of the 74F series, they can be used in a wide variety of applications.It is designed with 16 terminations as part of its basic configuration.There is a base part number of 74F258 which can also be used in order to locate the logic switch that are related to this item.The turn signal switch is supplied with a voltage of 5V volts.In this turn signal switch, there are 16 component pins.GULL WING represents the end of conductors.In this case, Single is employed as the supply type.The board is configured with 16 pins.Multiplexer ics are mounted in the direction of Surface Mount.I would like to refer to the logic switch as a member of the F/FAST family.Signal multiplexer provides 4 bits.To avoid some unnecessary failures, the maximum supply voltage (Vsup) should be kept at 5.5V.In order to maintain mux switch's normal operation, power is provided to 5V.There are 1 outputs designed for the operation of the turn signal switch.On the multiplexers, 2 input lines are provided for accepting voltage levels.
SN74F258DG4 Features
Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 5V
2 input lines
SN74F258DG4 Applications
There are a lot of Texas Instruments SN74F258DG4 Signal Switches / Multiplexers / Decoders applications.
- Computer memory
- Data communication
- To select different devices in microprocessor input
- High-performance memory-decoding applications
- High-performance memory systems
- Communication system
- Make full adder
- Control unit of Central Processing unit (CPU)
- Decimal decoder
- Memory system of computers
