banner_page

SN74F283DG4

5V TTL DUAL Counters & Dividers 16 Pins SOIC


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74F283DG4
  • Package: SOIC
  • Datasheet: -
  • Stock: 734
  • Description: 5V TTL DUAL Counters & Dividers 16 Pins SOIC(Kg)

Details

Tags

Parameters
Mount Surface Mount
Package / Case SOIC
Number of Pins 16
Weight 141.690917mg
Packaging Rail/Tube
JESD-609 Code e4
Pbfree Code yes
Moisture Sensitivity Level (MSL) 1
Number of Terminations 16
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Max Operating Temperature 70°C
Min Operating Temperature 0°C
Additional Feature FULL ADDER; WITH INTERNAL CARRY LOOKAHEAD; PERMITS RIPPLE CARRY CASCADING
Subcategory Arithmetic Circuits
Technology TTL
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Pin Count 16
Operating Supply Voltage 5V
Power Supplies 5V
Temperature Grade COMMERCIAL
Number of Channels 1
Max Supply Voltage 5.5V
Min Supply Voltage 4.5V
Load Capacitance 50pF
Number of Bits 4
Propagation Delay 9.5 ns
Turn On Delay Time 10.5 ns
Family F/FAST
Logic Function Binary Full Adder
Output Polarity TRUE
Logic IC Type ADDER/SUBTRACTOR
High Level Output Current -1mA
Low Level Output Current 20mA
Power Supply Current-Max (ICC) 55mA
Length 9.9mm
Width 3.9mm
Radiation Hardening No
RoHS Status RoHS Compliant
Lead Free Contains Lead

SN74F283DG4 Overview


This device is supplied in the SOIC package. This configuration uses 16terminations. By supplying 5Vwith a voltage of 5V , the device can be operated in a completely flexible manner. The total number of component pins is 16. It is packaged in a manner consistent with Rail/Tube. Circuit components are connected by 16pins. Surface Mountis the way in which it is mounted. In this case, it appears as a member of the F/FAST family. There is information in the device in the form of 4bits. As far as Pbfree code is concerned, the result may be yes. When it comes to this electronic device, FULL ADDER; WITH INTERNAL CARRY LOOKAHEAD; PERMITS RIPPLE CARRY CASCADING are much important features. Temperature grade COMMERCIALhas been selected for this device. As a result of the voltage source, there is 5V voltage. The device requires a supply voltage of [0]. Electrical characteristics are stable at temperature 70°Cfor extended periods of time. It operates within a specified temperature range, with the lower limit typically set at 0°C degrees Celsius. 5.5Vis the maximum voltage that the device can handle. Devices are capable of operating at a minimum voltage of 4.5V. This electronic part belongs to the Arithmetic Circuits family. ADDER/SUBTRACTOR is the logic IC type it uses. An output voltage of a certain high level causes -1mAcurrent to flow into the output. At low-level voltages, there is 20mA current flowing into the output terminal. The 1channels are designed to configure its foundation.

SN74F283DG4 Features


Embedded in the SOIC package
FULL ADDER; WITH INTERNAL CARRY LOOKAHEAD; PERMITS RIPPLE CARRY CASCADING
Operating supply voltage of 5V
ADDER/SUBTRACTOR as logic IC type

SN74F283DG4 Applications


There are a lot of Texas Instruments SN74F283DG4 Counters & Dividers applications.

  • Timing applications
  • Digital multiplexing and demultiplexing
  • Dual Up Counters
  • Signal gating
  • ALGEBRAIC COMPUTATION
  • Programmable binary and decade
  • Fixed and programmable divide-by-10,9,8,7,6,5,4,3,2 counters
  • POWER COMPUTATION
  • SQUARE ROOT
  • Up Counters

Write a review

Note: HTML is not translated!
    Bad           Good