SN74F283DRE4
| Parameters | |
|---|---|
| High Level Output Current | -1mA |
| Low Level Output Current | 20mA |
| Power Supply Current-Max (ICC) | 55mA |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | FULL ADDER; WITH INTERNAL CARRY LOOKAHEAD; PERMITS RIPPLE CARRY CASCADING |
| Subcategory | Arithmetic Circuits |
| Technology | TTL |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Number of Bits | 4 |
| Propagation Delay | 9.5 ns |
| Turn On Delay Time | 10.5 ns |
| Family | F/FAST |
| Logic Function | Binary Full Adder |
| Output Polarity | TRUE |
| Logic IC Type | ADDER/SUBTRACTOR |
SN74F283DRE4 Overview
The device is packaged in the SOICtype. It is configured using 16terminations. With a supply voltage of 5V volts, it is possible to run it in a fully flexible manner. The total number of component pins is 16. There is a package in the form of Tape and Reel. As part of the circuit, there are 16pins that connect other components. To mount it, use the method of [0]. In this case, it appears as a member of the family [0]. The device stores 4bits of information. The result may be yesin terms of Pbfree code. It is important to note that FULL ADDER; WITH INTERNAL CARRY LOOKAHEAD; PERMITS RIPPLE CARRY CASCADINGare really important features of this electronic device. A temperature grade of COMMERCIALis specified for this device. The voltage source produces a voltage of 5V volts. In order for it to operate, it requires a supply voltage of 5V . Electrical characteristics are stable at temperature 70°Cfor extended periods of time. Generally, the temperature limit is set at 0°Cso it will operate over a specified range. 5.5Vis the maximum voltage that the device can handle. As low as 4.5Vis the minimum voltage that can be applied to the device. The part is from Arithmetic Circuits family. In this case, ADDER/SUBTRACTORrefers to the logic IC type being used. Upon application of a specified high-level voltage, there is -1mA current flowing into the output. At low-level voltages, there is 20mA current flowing into the output terminal. 1 channels are designed to configure its basis.
SN74F283DRE4 Features
Embedded in the SOIC package
FULL ADDER; WITH INTERNAL CARRY LOOKAHEAD; PERMITS RIPPLE CARRY CASCADING
Operating supply voltage of 5V
ADDER/SUBTRACTOR as logic IC type
SN74F283DRE4 Applications
There are a lot of Texas Instruments SN74F283DRE4 Counters & Dividers applications.
- ANALOG SIGNAL PROCESSING
- Control counters
- Fixed and programmable divide-by-10,9,8,7,6,5,4,3,2 counters
- Programmable binary and decade
- Decade counter/decimal decode display (CD4017B）
- counting/frequency sy nthesizers-BCD output
- Time delay circuits
- Clocks
- Time-delay circuits
- Timers
