SN74F283DRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | FULL ADDER; WITH INTERNAL CARRY LOOKAHEAD; PERMITS RIPPLE CARRY CASCADING |
| Subcategory | Arithmetic Circuits |
| Technology | TTL |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Number of Bits | 4 |
| Propagation Delay | 9.5 ns |
| Turn On Delay Time | 10.5 ns |
| Family | F/FAST |
| Logic Function | Binary Full Adder |
| Output Polarity | TRUE |
| Logic IC Type | ADDER/SUBTRACTOR |
| High Level Output Current | -1mA |
| Low Level Output Current | 20mA |
| Power Supply Current-Max (ICC) | 55mA |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SN74F283DRG4 Overview
This is a device supplied in the SOIC package. There are 16terminations used for configuring it. This device is fully flexible due to the supply voltage of [0]. There are 16pins on all components. In this case, it is packaged as Tape and Reel. Circuit components are connected with 16pins. Using [0], it can be mounted. In this case, it emerges as a member of the F/FAST family. There is information in the device in the form of 4bits. The result may be yesin terms of Pbfree code. It is important to note that FULL ADDER; WITH INTERNAL CARRY LOOKAHEAD; PERMITS RIPPLE CARRY CASCADINGare really important features of this electronic device. There is a temperature grade of COMMERCIALon this device. The voltage source produces 5Vvoltage. To operate, it requires a supply voltage of 5V volts. This device operates at 70°C°C for extended periods of time with acceptable electrical stability. It operates within a specified temperature range, with the lower limit typically set at 0°C degrees Celsius. 5.5Vis the maximum voltage available to the device. It is possible to operate the device at as low a voltage as 4.5V. This part is from the family [0]. It uses the logic IC type [0]. There is -1mA current flowing into the output at a specified high-level voltage. At a specified low-level voltage, there is 20mA current flowing into the output terminal. The 1channels are designed to configure its foundation.
SN74F283DRG4 Features
Embedded in the SOIC package
FULL ADDER; WITH INTERNAL CARRY LOOKAHEAD; PERMITS RIPPLE CARRY CASCADING
Operating supply voltage of 5V
ADDER/SUBTRACTOR as logic IC type
SN74F283DRG4 Applications
There are a lot of Texas Instruments SN74F283DRG4 Counters & Dividers applications.
- Signal gating
- Fixed and programmable counters greater than 10
- Up Counters
- Timers
- ANALOG SIGNAL PROCESSING
- VHF, UHF, FM, AM, etc.
- Decade counter/decimal decode display (CD4017B）
- POWER COMPUTATION
- counting/frequency sy nthesizers-BCD output
- Time-delay circuits
