banner_page

SN74F373DBR

D-Type, Latch 4.5V~5.5V 8 Bits Tri-State Latches 74F Series 74F373 20 Pins DUAL TTL 20-SSOP (0.209, 5.30mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74F373DBR
  • Package: 20-SSOP (0.209, 5.30mm Width)
  • Datasheet: PDF
  • Stock: 440
  • Description: D-Type, Latch 4.5V~5.5V 8 Bits Tri-State Latches 74F Series 74F373 20 Pins DUAL TTL 20-SSOP (0.209, 5.30mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 3 days ago)
Contact Plating Gold
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 20-SSOP (0.209, 5.30mm Width)
Number of Pins 20
Weight 156.687814mg
Operating Temperature 0°C~70°C
Packaging Cut Tape (CT)
Series 74F
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 20
ECCN Code EAR99
Subcategory FF/Latches
Packing Method TR
Technology TTL
Voltage - Supply 4.5V~5.5V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 0.65mm
Base Part Number 74F373
Pin Count 20
Output Type Tri-State
Operating Supply Voltage 5V
Circuit 8:8
Polarity Non-Inverting
Power Supplies 5V
Load Capacitance 50pF
Number of Ports 2
Output Current 24mA
Number of Bits 8
Propagation Delay 7 ns
Quiescent Current 38mA
Turn On Delay Time 8.6 ns
Family F/FAST
Logic Function D-Type, Latch
Output Characteristics 3-STATE
Current - Output High, Low 3mA 24mA
Logic Type D-Type Transparent Latch
Max I(ol) 0.024 A
Control Type ENABLE LOW
Power Supply Current-Max (ICC) 55mA
Number of Input Lines 8
Independent Circuits 1
Count Direction UNIDIRECTIONAL
Height 2mm
Length 7.2mm
Width 5.3mm
Thickness 1.95mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

SN74F373DBR Overview


The 20-SSOP (0.209, 5.30mm Width) package contains it. Cut Tape (CT) is the way it is packaged. It uses Tri-State as its output configuration. There is a logic type of D-Type Transparent Latch associated with this electrical device. Surface Mount is used to mount this electronic part. The voltage supply is 4.5V~5.5V. There is a temperature of 0°C~70°C at which the system operates. 74F is the series number of this FPGA. Electronic parts with 8 bits are designed for this application. The device consists of 20 terminations that are designed to be used in conjunction with it. The family in which it belongs to is 74F373. The device is operated when the supply voltage is set to 5V. The 20 pind are equipped with it. This electronic device is categorized as a F/FAST electronic device. In addition, it is designed with a pin number of 20. Mounting this electronic component follows the Surface Mount method. This device has 2 ports. This part can be found within the FF/Latches subcategory. A total of 5V power supplies are needed to run it. It contains 8 input lines where electronic circuits are present. Its reliable performance makes it an excellent choice for TR. Its output current of 24mA ensures maximum design flexibility. A high level of efficiency is achieved by maintaining the supply voltage at 5V. It consumes 38mA of quiescent current without being affected by external factors. When the maximum power current (ICC) is supplied for its operation, it reaches 55mA.

SN74F373DBR Features


20-SSOP (0.209, 5.30mm Width) package
74F series
8 Bits
74F373 family
20 pin count
20 pins
5V power supplies

SN74F373DBR Applications


There are a lot of Texas Instruments SN74F373DBR Latches applications.

  • Control circuits
  • Lamp and Display (LED)
  • Serial Input
  • Avionics
  • Automotive ADAS
  • Relay
  • Flip-flops
  • Parallel data synchronization
  • Sample and hold register
  • Programmable binary

Write a review

Note: HTML is not translated!
    Bad           Good