Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 3 days ago) |
Contact Plating |
Gold |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
20-SOIC (0.295, 7.50mm Width) |
Number of Pins |
20 |
Weight |
500.709277mg |
Operating Temperature |
0°C~70°C |
Packaging |
Tube |
Series |
74F |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
20 |
Termination |
SMD/SMT |
ECCN Code |
EAR99 |
Subcategory |
FF/Latches |
Packing Method |
TR |
Technology |
TTL |
Voltage - Supply |
4.5V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Base Part Number |
74F373 |
Pin Count |
20 |
Output Type |
Tri-State |
Operating Supply Voltage |
5V |
Circuit |
8:8 |
Polarity |
Non-Inverting |
Power Supplies |
5V |
Load Capacitance |
50pF |
Number of Ports |
2 |
Output Current |
24mA |
Number of Bits |
8 |
Propagation Delay |
8 ns |
Quiescent Current |
38mA |
Turn On Delay Time |
8.6 ns |
Family |
F/FAST |
Logic Function |
D-Type, Latch |
Current - Output High, Low |
3mA 24mA |
Logic Type |
D-Type Transparent Latch |
Max I(ol) |
0.024 A |
Control Type |
ENABLE LOW |
Power Supply Current-Max (ICC) |
55mA |
Number of Input Lines |
8 |
Independent Circuits |
1 |
Number of Output Lines |
3 |
Count Direction |
UNIDIRECTIONAL |
Height |
2.65mm |
Length |
12.8mm |
Width |
7.5mm |
Thickness |
2.35mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74F373DW Overview
In the 20-SOIC (0.295, 7.50mm Width) package, it is embedded. This package has the format of Tube. In this configuration, the output is set to Tri-State. There is a logic type of D-Type Transparent Latch for this electrical device. The electronic component is mounted according to the Surface Mount method. In order for it to operate, it needs a supply voltage of 4.5V~5.5V. During operation, the temperature is set at 0°C~70°C. An FPGA in this series belongs to the 74F family. An electronic part with 8 bits is designed. This device has 20 terminations. It belongs to 74F373 family. The device works with a voltage of 5V for its supply voltage. The device is equipped with 20 pins. This electronic device belongs to the family of F/FAST. This board has 20 pins on it, which is what it is designed for. The electronic part is mounted using the Surface Mount method. As far as ports are concerned, this device has 2 ports. This part can be found within the FF/Latches subcategory. The device is powered by 5V power supplies. There are 8 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply. The reliability of this device makes it well suited to TR. Its 24mA output current allows for maximum design flexibility. A high level of efficiency is achieved by maintaining the supply voltage at 5V. It follows that 3 output lines are generated from the binary equivalent of the input line. It consumes 38mA of quiescent current without being affected by outside factors. Maximum power supply (ICC) for its operation is 55mA.
SN74F373DW Features
20-SOIC (0.295, 7.50mm Width) package
74F series
8 Bits
74F373 family
20 pin count
20 pins
5V power supplies
SN74F373DW Applications
There are a lot of Texas Instruments SN74F373DW Latches applications.
- BCD counting
- Automotive HEV/EV Powertrain
- Multistage ripple counting
- TV Set-top Boxes
- Clocks
- Communication systems
- Parallel data synchronization
- Shift left with parallel loading
- Registers
- Timers