banner_page

SN74F373DWR

D-Type, Latch 4.5V~5.5V 8 Bits Tri-State Latches 74F Series 74F373 20 Pins DUAL TTL 20-SOIC (0.295, 7.50mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74F373DWR
  • Package: 20-SOIC (0.295, 7.50mm Width)
  • Datasheet: PDF
  • Stock: 732
  • Description: D-Type, Latch 4.5V~5.5V 8 Bits Tri-State Latches 74F Series 74F373 20 Pins DUAL TTL 20-SOIC (0.295, 7.50mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 2 days ago)
Contact Plating Gold
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 20-SOIC (0.295, 7.50mm Width)
Number of Pins 20
Weight 500.709277mg
Operating Temperature 0°C~70°C
Packaging Cut Tape (CT)
Series 74F
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 20
ECCN Code EAR99
Subcategory FF/Latches
Packing Method TR
Technology TTL
Voltage - Supply 4.5V~5.5V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Base Part Number 74F373
Pin Count 20
Output Type Tri-State
Operating Supply Voltage 5V
Circuit 8:8
Polarity Non-Inverting
Power Supplies 5V
Load Capacitance 50pF
Number of Ports 2
Output Current 24mA
Number of Bits 8
Propagation Delay 7 ns
Quiescent Current 38mA
Turn On Delay Time 8.6 ns
Family F/FAST
Logic Function D-Type, Latch
Output Characteristics 3-STATE
Current - Output High, Low 3mA 24mA
Logic Type D-Type Transparent Latch
Max I(ol) 0.024 A
Control Type ENABLE LOW
Power Supply Current-Max (ICC) 55mA
Number of Input Lines 8
Independent Circuits 1
Count Direction UNIDIRECTIONAL
Height 2.65mm
Length 12.8mm
Width 7.5mm
Thickness 2.35mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

SN74F373DWR Overview


Package 20-SOIC (0.295, 7.50mm Width) includes it. Cut Tape (CT) is the way it is packaged. Tri-State is the output configured for it. In this electrical device, the logic type is D-Type Transparent Latch. This electronic part is mounted in the way of Surface Mount. A voltage of 4.5V~5.5V is used as the supply voltage for this device. A temperature of 0°C~70°C is used for operation. This FPGA is part of the 74F series. This electronic part is designed with 8 Bits. This device has been designed with 20 terminations available. 74F373 is the family name of it. With a supply voltage of 5V, it operates. With 20 pins, it is equipped. It is a member of the F/FAST family of electronic devices. The pin configuration of the device is 20. Electronic parts are mounted using the Surface Mount method. This device has 2 ports on board, which are all available at the same time. Subcategory FF/Latches includes this part. There are 5V power supplies required for this machine to operate. Electronic circuits comprise 8 input lines. This device is well suited for TR based on its reliable performance. Its 24mA output current allows for maximum design flexibility. Optimal efficiency requires 5V as the supply voltage. Aquiescent current is consumed by 38mA without being affected by external forces. A maximal power current (ICC) is generated for its operation at 55mA.

SN74F373DWR Features


20-SOIC (0.295, 7.50mm Width) package
74F series
8 Bits
74F373 family
20 pin count
20 pins
5V power supplies

SN74F373DWR Applications


There are a lot of Texas Instruments SN74F373DWR Latches applications.

  • Shift left register
  • Serial Input
  • Address register
  • Registers
  • Counter
  • Pattern Generators
  • Buffer register
  • Synchronous frequency dividers
  • Frequency dividing
  • Hammer

Write a review

Note: HTML is not translated!
    Bad           Good