banner_page

SN74F373N

D-Type, Latch 4.5V~5.5V 8 Bits Tri-State Latches 74F Series 74F373 20 Pins DUAL TTL 20-DIP (0.300, 7.62mm)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74F373N
  • Package: 20-DIP (0.300, 7.62mm)
  • Datasheet: PDF
  • Stock: 203
  • Description: D-Type, Latch 4.5V~5.5V 8 Bits Tri-State Latches 74F Series 74F373 20 Pins DUAL TTL 20-DIP (0.300, 7.62mm)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 4 days ago)
Mount Through Hole
Mounting Type Through Hole
Package / Case 20-DIP (0.300, 7.62mm)
Number of Pins 20
Weight 1.1991g
Operating Temperature 0°C~70°C
Packaging Tube
Series 74F
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 20
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory FF/Latches
Technology TTL
Voltage - Supply 4.5V~5.5V
Terminal Position DUAL
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 2.54mm
Base Part Number 74F373
Pin Count 20
Output Type Tri-State
Operating Supply Voltage 5V
Circuit 8:8
Polarity Non-Inverting
Power Supplies 5V
Load Capacitance 50pF
Number of Ports 2
Output Current 24mA
Number of Bits 8
Propagation Delay 13 ns
Quiescent Current 38mA
Turn On Delay Time 8.6 ns
Family F/FAST
Logic Function D-Type, Latch
Output Characteristics 3-STATE
Current - Output High, Low 3mA 24mA
Logic Type D-Type Transparent Latch
Max I(ol) 0.024 A
Control Type ENABLE LOW
Power Supply Current-Max (ICC) 55mA
Number of Input Lines 8
Independent Circuits 1
Count Direction UNIDIRECTIONAL
Height 5.08mm
Length 24.33mm
Width 6.35mm
Thickness 4.57mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

SN74F373N Overview


It is embedded in the 20-DIP (0.300, 7.62mm) package. Tube is the packaging method. Tri-State is the output configured for it. There is D-Type Transparent Latch logic type for this electrical device. Mounting this electronic component follows the Through Hole method. There is no supply voltage for this device. There is 0°C~70°C operating temperature. It is a type of FPGA belonging to the 74F series. 8 Bits are used in the design of this electronic part. In this device, there are 20 terminations. This type belongs to the 74F373 family. The device works with a voltage of 5V for its supply voltage. The 20 pind are equipped with it. F/FAST is the family name of this electronic device. The 20 pins are designed into it. This electronic part is mounted in the way of Through Hole. This device has 2 ports on board, which are all available at the same time. The part is in the FF/Latches subcategory. There are 5V power supplies attached to it. In the circuit, there are 8 input lines that are constituted by an electronic circuit. With an output current of 24mA, it is highly flexible in terms of design. A high level of efficiency is achieved by maintaining the supply voltage at 5V. The current consumed by the device is 38mA volts in quiescent mode, which cannot be affected by external factors. In order for the device to operate at its maximum power, the maximum power current (ICC) of 55mA is needed for operation.

SN74F373N Features


20-DIP (0.300, 7.62mm) package
74F series
8 Bits
74F373 family
20 pin count
20 pins
5V power supplies

SN74F373N Applications


There are a lot of Texas Instruments SN74F373N Latches applications.

  • Automatic test equipment
  • Pattern generators
  • Shift Registers
  • General-Purpose Register
  • Flip-flops
  • Multistage ripple counting
  • Four-bit storage with output enable
  • Watches
  • Automotive Infotainment
  • Synchronous frequency dividers

Write a review

Note: HTML is not translated!
    Bad           Good