SN74F374NSR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Weight | 266.712314mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74F |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74F374 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Clock Frequency | 70MHz |
| Propagation Delay | 8.5 ns |
| Turn On Delay Time | 3.2 ns |
| Family | F/FAST |
| Logic Function | D-Type, Flip-Flop |
| Current - Output High, Low | 3mA 24mA |
| Max I(ol) | 0.024 A |
| Max Propagation Delay @ V, Max CL | 8.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Number of Output Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 70000000Hz |
| Height | 2mm |
| Length | 12.6mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74F374NSR Overview
20-SOIC (0.209, 5.30mm Width)is the packaging method. It is included in the package Cut Tape (CT). Tri-State, Non-Invertedis the output configured for it. It is configured with a trigger that uses Positive Edge. There is an electronic component mounted in the way of Surface Mount. It operates with a supply voltage of 4.5V~5.5V. In this case, the operating temperature is 0°C~70°C TA. D-Typedescribes this flip flop. JK flip flop is a part of the 74Fseries of FPGAs. A frequency of 70MHzshould not be exceeded by its output. In total, it contains 1 elements. There have been 20 terminations. Members of the 74F374family make up this object. Power is supplied from a voltage of 5V volts. Electronic devices of this type belong to the F/FASTfamily. Electronic part Surface Mountis mounted in the way. The electronic flip flop is designed with pins 20. This device has the clock edge trigger type of Positive Edge. This RS flip flops is a part number FF/Latches. An electronic part designed with 8bits is used in this application. Using 8 circuits, it is highly flexible. Due to its reliability, this T flip flop is well suited for TR. The system runs on a power supply of 5V watts. This flip flop has a total of 2ports. If high efficiency is to be achieved, the supply voltage should be maintained at 5V. Featuring the maximum design flexibility, it has an output current of 24mA . It operates with 3 output lines.
SN74F374NSR Features
Cut Tape (CT) package
74F series
20 pins
8 Bits
5V power supplies
SN74F374NSR Applications
There are a lot of Texas Instruments SN74F374NSR Flip Flops applications.
- Safety Clamp
- Computers
- Computing
- Parallel data storage
- Consumer
- Power down protection
- Matched Rise and Fall
- Frequency Dividers
- Frequency division
- Count Modes
