SN74F377ADW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74F |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | D-Type |
| Additional Feature | WITH HOLD MODE |
| Subcategory | FF/Latch |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74F377 |
| Function | Standard |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Output Current | 20mA |
| Number of Bits | 8 |
| Clock Frequency | 125MHz |
| Propagation Delay | 10.5 ns |
| Turn On Delay Time | 6.5 ns |
| Family | F/FAST |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 72mA |
| Current - Output High, Low | 1mA 20mA |
| Max I(ol) | 0.02 A |
| Max Propagation Delay @ V, Max CL | 9ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Power Supply Current-Max (ICC) | 90mA |
| Clock Edge Trigger Type | Positive Edge |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74F377ADW Overview
The item is packaged in 20-SOIC (0.295, 7.50mm Width)cases. It is contained within the Tubepackage. Non-Invertedis the output configured for it. There is a trigger configured with Positive Edge. Surface Mountis positioned in the way of this electronic part. Powered by a 4.5V~5.5Vvolt supply, it operates as follows. 0°C~70°C TAis the operating temperature. D-Typeis the type of this D latch. It belongs to the 74Fseries of FPGAs. It should not exceed 125MHzin its output frequency. In total, it contains 1 elements. It consumes 72mA of quiescent current without being affected by external factors. Currently, there are 20 terminations. This D latch belongs to the family of 74F377. An input voltage of 5Vpowers the D latch. The electronic device belongs to the F/FASTfamily. It is mounted in the way of Surface Mount. This board is designed with 20pins on it. A Positive Edgeclock edge trigger is used in this device. There is a base part number FF/Latchfor the RS flip flops. 8bits are used in its design. Its flexibility is enhanced by 8 circuits. A total of 5V power supplies are needed to run it. If high efficiency is desired, the supply voltage should be kept at 5V. In addition to its maximum design flexibility, the output current of the T flip flop is 20mA. Additionally, you may refer to the D latch's additional WITH HOLD MODE.
SN74F377ADW Features
Tube package
74F series
20 pins
8 Bits
5V power supplies
SN74F377ADW Applications
There are a lot of Texas Instruments SN74F377ADW Flip Flops applications.
- Control circuits
- Buffered Clock
- Common Clocks
- Instrumentation
- Matched Rise and Fall
- Modulo – n – counter
- Single Down Count-Control Line
- CMOS Process
- Memory
- Load Control
